Farm Equipment - Need a snap coupler measurement

Print Page | Close Window

Need a snap coupler measurement

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133212
Printed Date: 27 Aug 2025 at 6:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Need a snap coupler measurement

Posted By: littlemarv
Subject: Need a snap coupler measurement
Date Posted: 30 Dec 2016 at 5:52pm

Anybody have a WD with lift arm latches installed handy? I am brainstorming and need to know how far apart the lift latches are.

If someone could measure how far apart the latches are, I would appreciate it.

Lets say as you are standing behind the tractor, measure from the middle of one latch to the middle of the other.

Thanks in advance.

-------------
The mechanic always wins.

B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H

Replies:

Posted By: Dans 7080
Date Posted: 30 Dec 2016 at 7:43pm

Measure from the center of one lift arm to the other. Should center the lift latches.

-------------
When someone tells you Nothings Impossible, Tell them to slam a revolving door

Posted By: Dave (NE)
Date Posted: 01 Jan 2017 at 10:55am

If you are looking to clear something, you probably need to know inside the springs and rivet, which on my WD45 is 25". If you just want to know between the latches, it is 27 3/4". If a picture helps, let me know and I can get one as I have my blade mounted and ready for the snow.

Posted By: R Aiken
Date Posted: 01 Jan 2017 at 4:37pm

30" center to center

Posted By: littlemarv
Date Posted: 01 Jan 2017 at 5:43pm

Thanks for the help!

-------------
The mechanic always wins.

B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H