Farm Equipment - Need a WD45 gas crankshaft

Print Page | Close Window

Need a WD45 gas crankshaft

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13223
Printed Date: 01 Feb 2025 at 10:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Need a WD45 gas crankshaft

Posted By: Jamie NC
Subject: Need a WD45 gas crankshaft
Date Posted: 31 May 2010 at 9:03pm

Ok guys still need a gas crank with good mains that can be turned no more than 0.020 undersize. Rod journal don,t have to be good at all, will welding them up.Send PM with what you have and the price and shipping cost to zip code 28613.

Thanks Jamie Sigmon

-------------
Allis tractor puller CA WC WD D17

Replies:

Posted By: Jamie NC
Date Posted: 01 Jun 2010 at 12:33pm

BUMP

-------------
Allis tractor puller CA WC WD D17

Posted By: Don(MO)
Date Posted: 01 Jun 2010 at 12:45pm

I have a WD45 shaft there in KC MO. that will need to be turned down, I'll look tonight and see if it will work for you.

Don

-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.

Posted By: CTuckerNWIL
Date Posted: 01 Jun 2010 at 5:16pm

If you plan on welding the rod journals what difference does it make if the mains are a little under? They can be turned, welded, and ground back to original size if needed.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: mlpankey
Date Posted: 01 Jun 2010 at 6:08pm

He is not wanting the expense of having the mains welded as well but enough meat to turn the mains in under to straighten the crank after the rod journals have been welded and offset ground.

-------------
people if they don't already know it you can't tell them. quote yogi berra

Posted By: Don(MO)
Date Posted: 01 Jun 2010 at 7:07pm

OK I just looked at my shaft, The good news is rods will cleanup at .030. The bad news is the mains need to be cut down to .030 too. Let me know if you can use it. The price will be right. This shaft is out of a 1957 WD45.

Don

Posted By: norm [ind]
Date Posted: 01 Jun 2010 at 8:17pm

we have wd45 crankshafts will check inventory need phone #

Posted By: Jamie NC
Date Posted: 01 Jun 2010 at 9:53pm

Mlpankey, Knows what I am after.Yes you can weld all of the journals but that cost alot more money.

Norm, send PM on this site with what you have and price with shipping to 28613.

Thanks in advance.

-------------
Allis tractor puller CA WC WD D17

Posted By: d17brown
Date Posted: 02 Jun 2010 at 7:41am

i have a wd 45 crank that has been rough welded and needs to finished ground

Posted By: d17brown
Date Posted: 02 Jun 2010 at 7:42am

call this number and talk to keith , he had it a couple months ago. 5635828710