200 questions
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131781
Printed Date: 20 Aug 2025 at 2:24am Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 200 questions
Posted By: Tenn allis
Subject: 200 questions
Date Posted: 24 Nov 2016 at 8:24pm
May have a chance to buy a 200 allis my dad bought new in early 70's wondering if you could add the 1000/540 pro shaft to it was a 540 originally doesn't have hydraulic pto just the big lever to the left of the seat
|
Replies:
Posted By: DrAllis
Date Posted: 24 Nov 2016 at 8:50pm
Sure, it can be done, but might be more expensive than you think. You've got to buy a complete lift arm housing with the dual-speed shaft for starters. After that, you'll have to drop off the PTO clutch box and swap out the two internal gears, and those might be hard to find for your manual PTO set-up.
|
Posted By: Tenn allis
Date Posted: 24 Nov 2016 at 9:04pm
Did they make dual pto without the hydraulic engagement I know on the hydraulic ones they still have the coupler in the pd housing
|
Posted By: DrAllis
Date Posted: 24 Nov 2016 at 9:17pm
I think it was probably only offered as the 540/1000 hydraulic clutch style. But, that only means you need to find the 1000 RPM gears for a non-clutch PTO up in the PTO clutch box to make it work. All 540/1000 units are 1000 RPM on the front end of things.
|
Posted By: Tenn allis
Date Posted: 24 Nov 2016 at 9:19pm
Any recommendations on a good salvage yard that might have what I would need
|
Posted By: DrAllis
Date Posted: 25 Nov 2016 at 6:23am
I have a 540/1000 lift arm housing for $400, but we are 600 miles apart.
|
Posted By: Tenn allis
Date Posted: 25 Nov 2016 at 6:59am
If I get my hands on it we'll get in touch
|
Posted By: ILGLEANER
Date Posted: 25 Nov 2016 at 10:33am
DrAllis wrote:
I think it was probably only offered as the 540/1000 hydraulic clutch style. But, that only means you need to find the 1000 RPM gears for a non-clutch PTO up in the PTO clutch box to make it work. All 540/1000 units are 1000 RPM on the front end of things. | They did make it with a manual 540/1000 l had one here. We parted it out. Sold the 540/1000 to Leon B. He is on this website a lot.
------------- Education doesn't make you smart, it makes you educated.
|
|