simplicity prestige wont stay running
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131528
Printed Date: 19 Nov 2024 at 6:39pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: simplicity prestige wont stay running
Posted By: jmshank
Subject: simplicity prestige wont stay running
Date Posted: 18 Nov 2016 at 9:19am
I have an 06 simplicity prestige that starts and runs fine, until you release the clutch/brake lever. i have replaced the seat switch and the clutch switch with no luck. Has anyone else run across this problem. thanks James
-------------
D19,D15,WD,WC,A
|
Replies:
Posted By: jaybmiller
Date Posted: 19 Nov 2016 at 6:09am
Bin there before...got grey beard now to prove it ! It was on an new A-C rider,but seen it on others.
The 'new' connectors on the seat switches actually have a switch built inside them !! This keps guys from removing or bypassing the official switch..... Without the seat switch, the hidden, internal one will short out the 'safety' when you go to drive the rider.
Now I don't know if the other 'saftey' switches are the same but it was a PITA !!!
It's really too bad no one supplies proper wiring schematics for them...THAT.. would have saved me days of frustration.
Jay
-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
Posted By: jmshank
Date Posted: 21 Nov 2016 at 1:46pm
Thanks Jay! I have replaced that switch with a new one from agco, but i will check out the connector. Thanks again
-------------
D19,D15,WD,WC,A
|
|