All Crop Drill linkage
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131387
Printed Date: 23 May 2025 at 1:13pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: All Crop Drill linkage
Posted By: PBSoMd
Subject: All Crop Drill linkage
Date Posted: 15 Nov 2016 at 5:30pm
|
Looking for a pic of the clutch linkage for a 9 x 7 All Crop Drill if anyone has one. Trying to figure how the chain was mounted to disengage the clutch when raised. Pic out of a manual will work also. Thanks |
Replies:
Posted By: PaulB
Date Posted: 15 Nov 2016 at 5:37pm
|
Mine is up against a wall on the left side. The chain to disengage it is attached to the hook that the heavy chain carries it when lowered. 
------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: PBSoMd
Date Posted: 15 Nov 2016 at 5:53pm
| Thanks Paul, mine is a pull type, looks a little different but I think should work basically the same. This helps! |
Posted By: PaulB
Date Posted: 15 Nov 2016 at 5:57pm
|
I might have something clearer to look at if the parts book shows what you want. is yours hydraulic or rope lift?
------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: PBSoMd
Date Posted: 15 Nov 2016 at 6:00pm
|
Hydraulic Thanks |