crank shafts ?
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131346
Printed Date: 24 Nov 2024 at 7:32am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: crank shafts ?
Posted By: Robacpuller
Subject: crank shafts ?
Date Posted: 14 Nov 2016 at 8:40pm
|
I was going back on this pulling forum and I found at thread about crank shafts. Does anyone run a Kieth Merfeld crank? I have a crank of his in my tractor and it is the nicest crank I have seen done it is 6 inch. I was watching some pulling from the 2015 champ pull. I was wondering what size crank jr. Crum has and others have in there allis's and cubes, and who did some of the other cranks in tractors that r pulling. Panky sure gets his ass kicked on this forum sounds like he try's to know what he is talking about. I am building a wide front for mine right now, I want to go to waterloo in February, never pulled at a national pull hopefully I won't get my ass kicked. I don't think my 400 cubes is enough. Lol.
|
Replies:
Posted By: Zaddison
Date Posted: 14 Nov 2016 at 8:52pm
|
We contacted him a year ago and he said he was not doing tractor cranks any more.
|
Posted By: Robacpuller
Date Posted: 14 Nov 2016 at 9:04pm
|
I didn't know that, thanks he did my crank 9 years ago. Do u have his number I would like to talk to him.
|
Posted By: Zaddison
Date Posted: 14 Nov 2016 at 9:34pm
Posted By: dgerth
Date Posted: 14 Nov 2016 at 9:45pm
|
How are you building your front-end ? Looking for ideas on this topic. Any help? tks.
|
Posted By: Robacpuller
Date Posted: 14 Nov 2016 at 10:05pm
|
Still in thought posses myself. Thinking of modifiing my narrow font. Will do pics as I go along
|
Posted By: joetom08
Date Posted: 15 Nov 2016 at 4:14am
|
I doubt you will get anybody especially national pullers to tell you anything about their motors.. don't hurt to try though!
|
Posted By: Robacpuller
Date Posted: 15 Nov 2016 at 8:28pm
|
Joe how is your engine coming?
|
Posted By: joetom08
Date Posted: 16 Nov 2016 at 3:48am
|
Crank is at baril engine getting balanced. JD 466 sleeves are machined and ready to go into block. Just need to get new block out of donor tractor. I won't have it done in time for next year
|
|