Allis Chalmers B1 Bevel Gear Shaft
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131306
Printed Date: 19 Nov 2024 at 6:42pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis Chalmers B1 Bevel Gear Shaft
Posted By: Tailspin
Subject: Allis Chalmers B1 Bevel Gear Shaft
Date Posted: 13 Nov 2016 at 7:40pm
I need help understanding how the horizontal shaft through the bevel gear housing keeps the two bevel gears engaged. I assembled the horizontal bevel gear shaft into the housing according to the parts illustration. My horizontal (lateral) shaft moves left to right about 1/4 inch resulting is
Disengagement of the bevel gears. I can't figure out (see attached illustration) how the bevel gears are kept together (engaged). The illustration shows shims are be installed (as needed) to keep the gears engaged. The illustration doesn't seem to keep the gears pushed together all the time.
|
Replies:
Posted By: littlemarv
Date Posted: 13 Nov 2016 at 7:50pm
Without being able to see it, I think you need to install the pulley and tighten the nut. Then shim as necessary.
-------------
The mechanic always wins.
B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H
|
Posted By: farmtoybuilder
Date Posted: 14 Nov 2016 at 10:05am
As little marv said you have to install pulleys and tighten nut to check. Will take a few try's to get it correct. Engineers should have made designed it better!
-------------
5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them.
|
|