185 Width w/ 30" Rears
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131179
Printed Date: 22 May 2025 at 7:57am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 185 Width w/ 30" Rears
Posted By: TimNearFortWorth
Subject: 185 Width w/ 30" Rears
Date Posted: 10 Nov 2016 at 7:34pm
Need to transport a 185 with 30" rear rubber and seller will not be near tractor until he meets me there for load-out. Seller says he knows wheels are in on last stop position.
If memory serves, should be about 8" wider(?) than my D17IV, with 28's and they are 79" on outside width.
Anybody happen to have this dimension handy?
Thanks!
|
Replies:
Posted By: zulawski87
Date Posted: 10 Nov 2016 at 8:03pm
|
30" rim I assume? I have mine narrowed up with 18.4 x 30 on it. I could go measure quick
|
Posted By: jiminnd
Date Posted: 10 Nov 2016 at 8:54pm
Don't have measurements but hauled mine on a skid steer trailer that is 81 inchs wide between wheel wells.
-------------
1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner)
|
Posted By: TimNearFortWorth
Date Posted: 11 Nov 2016 at 7:18am
Jim, did yours have 18.4-30 rubber? I am 83" between my fenders on my low deck gooseneck. Can use blocks to support majority of the weight so I can back it on over and just in front of the welded on fenders as axles are far enough back on trailer that driving it on will not put enough weight forward of the axles.
This unit has new Firestone 30" rears so I'm figuring on 86, 87" with em' all the way in to first stop.
|
Posted By: TimNearFortWorth
Date Posted: 11 Nov 2016 at 7:21am
Zulawski87, it would be great if you could grab that measurement as I have now put this off till next week vs. Saturday . . . .
Thanks
|
Posted By: IBWD MIke
Date Posted: 11 Nov 2016 at 9:29am
|
I will measure Dad's today, if I can remember to.
|
Posted By: TimNearFortWorth
Date Posted: 11 Nov 2016 at 9:39am
|
Thanks all; that is what makes this site so good, everyone offering up info when requests are put forward.
|
Posted By: IBWD MIke
Date Posted: 11 Nov 2016 at 7:38pm
|
I measured 81" outside of rear tires. The wheels are spun out to the first stop hole, if you spun them in all the way would be 77" I think.
|
Posted By: TimNearFortWorth
Date Posted: 11 Nov 2016 at 7:53pm
|