is one of these the correct seat for a 51 WD?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131080
Printed Date: 22 May 2025 at 2:37pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: is one of these the correct seat for a 51 WD?
Posted By: Les Royer
Subject: is one of these the correct seat for a 51 WD?
Date Posted: 08 Nov 2016 at 10:05pm
|
Can anybody identify any of em before I ask ole Ted if I can throw em in the iron pile? Please Lord, don't let it be the one left front. That one would hurt.  ------------- I still gots my A/C but it's clear out in the barn now. |
Replies:
Posted By: NDBirdman
Date Posted: 08 Nov 2016 at 10:12pm
|
Top left one looks like what's on mine. ------------- 1955 WD45 S#205467, 190XT #6652 DXT |
Posted By: grinder220
Date Posted: 08 Nov 2016 at 10:18pm
|
NDBirdman wrote:Posted By: dawntreader74
Date Posted: 08 Nov 2016 at 10:18pm
| the top left one is the right one'' if you don't want the other ones' i will give you something for them. don't junk them' they would it lest be good wall hangers! |
Posted By: CrestonM
Date Posted: 08 Nov 2016 at 10:22pm
|
If that top left one if for a WD/WD45, I'll buy it. Don't junk it!!
As far as the other two...citybots shell out big bucks for that kinda stuff!!
|
Posted By: corbinstein
Date Posted: 09 Nov 2016 at 6:28am
| make bar stools out of em and you'll get paid by the city slickers! |
Posted By: Calvin Schmidt
Date Posted: 09 Nov 2016 at 7:07am
|
The centre one is correct for the WD. ------------- Nothing is impossible if it is properly financed |
Posted By: Les Royer
Date Posted: 09 Nov 2016 at 7:19am
|
Now Creston, I gotta put one of em on the tractor. I can't be sittin on jest that bolt, you see. Bob, PM me your addy an I'll send em to ya. The nurse says I got enuf junk on the walls as it iz! ------------- I still gots my A/C but it's clear out in the barn now. |
Posted By: Sugarmaker
Date Posted: 09 Nov 2016 at 7:28am
|
Les, Glad to hear you a finally getting back to the WD project! Weld that up and get a nice seat cover for it! Regards, Chris ------------- D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet. |
Posted By: Les Royer
Date Posted: 09 Nov 2016 at 8:49am
|
I'm not quite back to it Chris, but I'm getting closer. Just trying to give myself a little breathing room by clearing some stuff that don't belong. ------------- I still gots my A/C but it's clear out in the barn now. |
Posted By: TedBuiskerN.IL.
Date Posted: 09 Nov 2016 at 8:58am
|
The bottom one is correct for a WC. ------------- Most problems can be solved with the proper application of high explosives. |
Posted By: Alberta Phil
Date Posted: 09 Nov 2016 at 9:23am
| Bottom one is also correct for a WF. The larger one on the right looks like the type used on McCormick-Deering. |
Posted By: DrAllis
Date Posted: 09 Nov 2016 at 9:46am
| I think a 1951 WD looks similar to the center seat pan, but with 5 holes instead of 3 holes. |
Posted By: stu(ON)
Date Posted: 09 Nov 2016 at 10:04am
|
The original seat for my '51 disintegrated years ago. However, the original operators manual shows the three hole version as is the middle seat. |
Posted By: alan-nj
Date Posted: 09 Nov 2016 at 11:36am
|
My 53 wd has the 5 hole seat, similar to the one on top left. I have an aftermarket WC seat with the one on the top right. ------------- If ignorance is bliss, than happy days are here again. |
Posted By: Stan IL&TN
Date Posted: 09 Nov 2016 at 11:53am
I'd say pick the one that fits your ___ best.  ------------- 1957 WD45 dad's first AC 1968 one-seventy 1956 F40 Ferguson |
Posted By: Bill_MN
Date Posted: 09 Nov 2016 at 2:55pm
|
Upper left is the original "3-hole" seat for WD
------------- 1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow |
Posted By: Greg (Hillsboro, OH)
Date Posted: 09 Nov 2016 at 3:25pm
| my daughter took and put implement seats like these on top of the old steel milk cans, and made bar stools out of them for her kitchen. They are pretty neat looking. |
Posted By: Brampton 02 gt
Date Posted: 09 Nov 2016 at 7:13pm
|
My 49 wd has five holes and my 55 wd45 also has 5. |
Posted By: thendrix
Date Posted: 09 Nov 2016 at 7:18pm
|
The on in the right looks like a good way to train for a prison sentence ------------- "Farming is a business that makes a Las Vegas craps table look like a regular paycheck" Ronald Reagan |
Posted By: dawntreader74
Date Posted: 09 Nov 2016 at 7:46pm
| les'' sent you a pm' |
Posted By: Ted J
Date Posted: 11 Nov 2016 at 7:49pm
Les, the one in the center is the correct one!!!! The early WC, WF, WD had the three hole pan seat, the LATTER WDs and the WD45 had the 5 hole seats. BUT........dealers were switching seats all the time to whatever a guy wanted. Supposedly more holes meant a cooler ride....... Just for you info ALONE (other guys, DO NOT READ THIS!! by penalty of a lickin at the wood shed) DO NOT throw them away!! WHAT we gonna do with you when YOU get OLD???? Throw you in the scrap pile?? SHEESH!!! YES, git ahold of some ole mile cans and bolt em to em and when I come down to visit, we can sit on em and enjoy a barley pop!! ------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |