Farm Equipment - CA Lift will not lower

Print Page | Close Window

CA Lift will not lower

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13069
Printed Date: 01 Feb 2025 at 3:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: CA Lift will not lower

Posted By: BV 2
Subject: CA Lift will not lower
Date Posted: 28 May 2010 at 10:15am

The lift on my ca is stuck in the up position and will not lower? Any tricks to this, thanks BV 2

Replies:

Posted By: Bill Long
Date Posted: 28 May 2010 at 10:29am

Check the linkage first to be certain it is properly adjusted. Check the bottle valve on the top of the pump to be sure it is connectred and moving. Be certain the plates are working together. Then on the hyd pump there is a screw closest to the front - I do not know the letter - screw it in slowly. It controls the valve rack. May help.

Let us know how it goes.

Good Luck!

Bill Long

Posted By: wkpoor
Date Posted: 28 May 2010 at 10:36am

Happened to me once too. Stayed up for 2 wks at full trapped pressure. You might try loosening a cyl hose to relieve pressure and possibly return system to normal.

Posted By: BV 2
Date Posted: 29 May 2010 at 7:07am

Thanks guys for the infomation, when inspecting the bottle valve i found the ball was missing, blead the lines and started working. Thanks again for the help