Pulling Forum - Lite narrow front

Print Page | Close Window

Lite narrow front

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=130274
Printed Date: 24 Nov 2024 at 7:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Lite narrow front

Posted By: dgerth
Subject: Lite narrow front
Date Posted: 21 Oct 2016 at 9:02am

Guys,

I would like to source a lite weight NFE for my WD puller. Any suggestions or sources of information on this subject greatly appreciated, tks

Replies:

Posted By: Charlie175
Date Posted: 21 Oct 2016 at 9:22am

early WC pedestal ?

Use B/C rims made to fit the WD rim

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Posted By: dgerth
Date Posted: 21 Oct 2016 at 9:33am

Do you know what the weight savings would be, approx as I need to loose about 150 lbs.

Not me personally but the tractor lol!

Posted By: Charlie175
Date Posted: 21 Oct 2016 at 9:50am

I had heard 100 lbs but I am not sure.

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Posted By: Charlie175
Date Posted: 21 Oct 2016 at 9:52am

My WD weighs in 3450 with me on it (210)

No fenders/pto and just about everything off of it as possible with stock rims and 14.9x28's

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Posted By: NA G301
Date Posted: 21 Oct 2016 at 12:36pm

if it helps i installed a WC narrow front end . Cleaned, packed bearings in grease less tires and rims it wt in at 160 lbs and i trimed off rear leadge and removed hand crank shaft