720 Hour Meter
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=130092
Printed Date: 19 Nov 2024 at 7:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 720 Hour Meter
Posted By: Dave (NE)
Subject: 720 Hour Meter
Date Posted: 16 Oct 2016 at 6:10pm
| While I'm on a roll with my questions on the 720, I've noticed that my hour meter is not functioning. Is there an easy fix, or do I need to replace the meter? some wiring? connections? Dave |
Replies:
Posted By: HudCo
Date Posted: 16 Oct 2016 at 8:32pm
| needs 12v. when the key is on and a good ground if that doesnt work then its bad |
Posted By: DSeries4
Date Posted: 16 Oct 2016 at 9:36pm
|
most likely the meter is no good. I've come across many that do not work, mine included.
------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: mnoonan-NEWI
Date Posted: 16 Oct 2016 at 10:04pm
|
Check out this replacement hour meter; http://www.surpluscenter.com/Electrical/Meters-Counters-Timers/Meters/12-VDC-HOUR-METER-RECTANGULAR-1-2507.axd" rel="nofollow - http://www.surpluscenter.com/Electrical/Meters-Counters-Timers/Meters/12-VDC-HOUR-METER-RECTANGULAR-1-2507.axd
------------- AC CA, Ferguson TO-20, Ford NAA, M-M BG, AC #3 Mower, SC Plow, PH Digger, AC 720's with Ark 700 loader & Brantly Backhoe, "Mini B" w/flathead Ford V8 |
Posted By: coggonobrien
Date Posted: 17 Oct 2016 at 7:32am
| you can buy hobbs meters off ebay and amazon. easiest way to install is pull the steering wheel, unbolt the dash and left to gain access. |
Posted By: Dave (NE)
Date Posted: 23 Oct 2016 at 8:45am
| I got the meter from surplus center and got it installed. I does work, so I'm pleased with that. Thanks for all the help. Dave |
Posted By: Herb(GA)
Date Posted: 26 Oct 2016 at 12:25pm
| Dave; You bought Item # 1-2507, how did you do the rectangular installation? Herb(GA) |
Posted By: Dave (NE)
Date Posted: 26 Oct 2016 at 12:42pm
Herb, I had to take the dash loose, remove steering wheel, lifted it up so I could work under it without completely disconnecting everything (throttle cable, choke cable, etc.) and removed the old one. Slipped the new one in, put the bolts provided in, connected the wires and was done. I admit, it was kind of a pain. Hope that adequately explains what I did. Let me know if you need more info. Dave |
Herb(GA) wrote: