Allis Chalmers WF
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=129372
Printed Date: 21 Dec 2024 at 5:18am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis Chalmers WF
Posted By: Alberta Phil
Subject: Allis Chalmers WF
Date Posted: 29 Sep 2016 at 9:42am
|
I got a nice little Allis WF given to me a few years ago and started
working on it, than got side tracked after getting the engine out. The
engine was badly stuck and the head was trash. I pushed the sleeves and
pistons out and then split the sleeves off the pistons to salvage the
rods. I had a very good set of lightly used sleeves and pistons which I'd been saving and which were installed in the cleaned block with new rings and bearings. All new seals and gaskets and a rebuilt head, oil pump and water pump and it was back together, and then installed back in the tractor. This tractor has the nicest sheet metal of any that I have had. the Allis WF is fairly common in this are as it seems a large portion of the production was shipped to western Canada. I have another very good original that came from it's first owner that gets used around here quite often. I'll have to decide what to do with this one as it runs and drives very well. |
Replies:
Posted By: Alberta Phil
Date Posted: 29 Sep 2016 at 10:06am
Here are some pics. 
|
Posted By: boilerpete
Date Posted: 29 Sep 2016 at 11:14am
| Nice looking tractor! I need a set of fenders for mine. If anyone knows of any that can be salvaged, I'd be interested. |
Posted By: IBWD MIke
Date Posted: 29 Sep 2016 at 9:45pm
|
WF are just cool. Like a cross between a WD and an IB. |
Posted By: CrestonM
Date Posted: 29 Sep 2016 at 10:04pm
Just wish they had the hand clutch
 |
IBWD MIke wrote:Posted By: Steve in NJ
Date Posted: 30 Sep 2016 at 7:04am
|
Good lookin' WF Phil!! Couldn't find anything round' here, but Calvin found one pretty quick up there for me! LOL! ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: Butch(OH)
Date Posted: 30 Sep 2016 at 7:56am
Looks to be in about the same condition cosmetically as our 1950 model
 Ours came from Calder SAK, you guys live in the land of no rotting and it makes me envious . In spite of our efforts to preserve the condition of our WF it suffers from the humidity down here unless a person has climate controlled storage. |
Posted By: Hodgeja
Date Posted: 28 Feb 2020 at 8:29pm
| Got a WF to sell? I'm looking. |
Posted By: Alberta Phil
Date Posted: 29 Feb 2020 at 9:57am
|
Not any more! Sold the second one to a local young fellow and he did a super restoration on it. He has posted pictures of it on this site. He is just finishing off a WC that he bought from me. |