Construction and other equipment

Print Page | Close Window

Fiat Dozer Parts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=129305
Printed Date: 28 Sep 2024 at 2:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Fiat Dozer Parts

Posted By: Ian Beale
Subject: Fiat Dozer Parts
Date Posted: 27 Sep 2016 at 10:45pm

Our Fiat supply line in Oz - just now.

One of our FA 10 carrier rollers was showing a bit of tooth ache in the bearings and starting to leak oil a bit. The shell is worn but useable in our situation.

A new roller was $A 325.

The parts book shows the bushes and seal available, so I tried one of our local suppliers.

Bushes were $A16.40, seal $A 34.75 and o-rings $A 4.60.

The shaft polished up OK so I set about ordering the bits.

Available off his shelf. Delivery by post 1 day.

What I'm pointing out is that there doesn't seem to be a lack of even obscure Fiat parts - from previous references just in your part of the world

Replies:

Posted By: LeonR2013
Date Posted: 28 Sep 2016 at 7:41am

The theory here is, run it until it breaks scrape it and buy another one. That makes good sense doesn't it? LOL

Posted By: Ian Beale
Date Posted: 28 Sep 2016 at 5:01pm

Leon

You must have a bigger budget than I have!

That roller is going to do ranch service for a while.

Posted By: Coke-in-MN
Date Posted: 28 Sep 2016 at 5:57pm

Here trying to find things that are AC or A/F is hard as the supply chain seems to keep changing .

To get parts unless you find a place that has used thing hidden or not sold because no one knows they are around - is next to impossible

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: Lawrence
Date Posted: 28 Sep 2016 at 7:47pm

Is there any market for AC 45 Grader or HD-17 parts. They are both at local a scrap yard waiting to be scrapped. Both look near complete. Not sure if the HD is a 17, forgot to identify it better before I left the scrap yard. It is huge, might even be a HD-20. Let me know and I will go back next week and see if they are still there

Posted By: Ian Beale
Date Posted: 28 Sep 2016 at 11:07pm

Coke in MN

It would seem that the parts are available but that they're not getting through your supply line.

I should add that this is for Fiat sourced machines sourced from Italy - I doubt it will be much good for AC ones.