Farm Equipment - D19 or other power director measurements

Print Page | Close Window

D19 or other power director measurements

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=128835
Printed Date: 10 Oct 2025 at 12:50am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D19 or other power director measurements

Posted By: Teddy (punchie)
Subject: D19 or other power director measurements
Date Posted: 16 Sep 2016 at 10:06am

Well after about 8 hours to get to and get it apart. Tractor jacked up and all other parts off to split it 4-5 hours. Durn snap ring off and apart 2-3 hours. Now that I know how will be easier next time.

Parts :

One plate with groves worn just a little. Collar need an ID measurement for this, my looks okay.

What should the collar inside measure, anyone know?

Shifter is shot.

Thanks !!

Teddy

-------------
Ac D-19, a Number of WD's, One WD45, Two 444 balers, Ac plows and etc.

Replies:

Posted By: nevans
Date Posted: 16 Sep 2016 at 10:24am

teddy got your message but look at the teeth on the fiber plates also make sure their not wore and no flaking Niel

Posted By: Teddy (punchie)
Date Posted: 16 Sep 2016 at 10:57am

Teeth all look okay its the groves they are worn on one plate, say about 8 or 10 are worn off not more then 5 spots, and no more then three in one area. Only one plate show missing groves.

Thanks Teddy

-------------
Ac D-19, a Number of WD's, One WD45, Two 444 balers, Ac plows and etc.