Tire/wheel help
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=128256
Printed Date: 26 Apr 2025 at 3:49am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Tire/wheel help
Posted By: Hubnut
Subject: Tire/wheel help
Date Posted: 03 Sep 2016 at 6:26pm
I want to put these Carlisle tires on my B with woods mower. Shown here on the Miller Tire site: http://www.millertire.com/products/tractor-tires-rear/11-2-24_-10-24/11-2-24-carlisle-turf-pro-6-ply/" rel="nofollow - http://www.millertire.com/products/tractor-tires-rear/11-2-24_-10-24/11-2-24-carlisle-turf-pro-6-ply/
What width rim do I need? I'm guessing 10 inch? Thanks.
Steve
-------------
1940 B "Lucy"
1941 B w/ Woods L59 "Flavia"
1942 B w/ finish mower "Dick"
1941 C w/ 3-point "Maggie"
1947 C SFW w/ L306 "Trixie"
1972 314H
|
Replies:
Posted By: BigMo(TX)
Date Posted: 03 Sep 2016 at 7:18pm
Posted By: WF owner
Date Posted: 04 Sep 2016 at 7:07am
|
http://www.millertire.com/faqs/" rel="nofollow - This should help.
|
Posted By: HD6GTOM
Date Posted: 04 Sep 2016 at 10:59am
|
Hub--Look around you might be able to find that tire for less money than that. It says tubeless, if you use your old rims you will probably need to put tubes in them. Our B has 11.2X24 tractor rears on it and look good on there.
|
Posted By: Hubnut
Date Posted: 04 Sep 2016 at 2:23pm
The tires on the tractor now are 11.2x24. Is that the old size or new? Does that indicate the size of the rim? If so, what is it? Sorry about the questions. I just can't get the old and new sizes straight. HD6GTom, could you post a pic of your B? Thanks.
Steve
-------------
1940 B "Lucy"
1941 B w/ Woods L59 "Flavia"
1942 B w/ finish mower "Dick"
1941 C w/ 3-point "Maggie"
1947 C SFW w/ L306 "Trixie"
1972 314H
|
Posted By: Hubnut
Date Posted: 04 Sep 2016 at 2:33pm
Okay,
I figured it out. 11.2 is a modern size and it should be a 10 inch rim.
-------------
1940 B "Lucy"
1941 B w/ Woods L59 "Flavia"
1942 B w/ finish mower "Dick"
1941 C w/ 3-point "Maggie"
1947 C SFW w/ L306 "Trixie"
1972 314H
|
Posted By: CTuckerNWIL
Date Posted: 04 Sep 2016 at 2:40pm
There is no "old and new" to keep straight. 11.2 is a current size. You have 11.2's on it now and you want to put a different set of 11.2's on it. If an 11.2 ag tire will fit, an 11.2 turf tire will fit the same. If you have 8 inch rims, run a couple pounds less air pressure to keep the tire from getting too rounded.
You may want to run tubes in them also.
http://www.petestirestore.com/112-24-Carlisle-Turf-Pro-Tractor-Tire-6-Ply-TL_p_5857.html" rel="nofollow - http://www.petestirestore.com/112-24-Carlisle-Turf-Pro-Tractor-Tire-6-Ply-TL_p_5857.html
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
|