Farm Equipment - G sickle bar mower

Print Page | Close Window

G sickle bar mower

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=12815
Printed Date: 31 Jan 2025 at 8:39pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: G sickle bar mower

Posted By: Lincoln
Subject: G sickle bar mower
Date Posted: 22 May 2010 at 9:36pm

We picked up a sickle bar mower for the G the other day. I have a couple questions.

1. should there be a gasket between the tractor and the pto?

2. our pto is spinning, the pulley is spinning and the belt spins the larger pulley on the mower when engaged, however the shaft that causes the sickle to move does not spin. The sickle bar is lubed up and loose.

Thank you in advance for the help.

Lincoln

Replies:

Posted By: Creek Jenkins
Date Posted: 23 May 2010 at 8:19am

Lincoln -

Might be a sheared roll pin in the 90 deg gear box. The gears are held on to the shafts with roll pins. You can take the top of the gear box off and look down into it. This happened to mine last summer. Pretty easy to change, but make sure you get all the pin pieces - mine shattered the pin pretty bad.

cheers,

Creek