AC 185
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=12792
Printed Date: 31 Jan 2025 at 8:48pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC 185
Posted By: BStone
Subject: AC 185
Date Posted: 22 May 2010 at 11:37am
|
Will a front end loader off of a AC 190 fit a AC 185 without doing any fitting and welding? I can buy a AC 190 with an almost new loader on it for what the loader is worth.The 190 has problems and I am not interested in fixing it.
|
Replies:
Posted By: DougG
Date Posted: 22 May 2010 at 1:09pm
|
Should bolt right on - BUT- if the loader frame runs to the back of the tractor the axle housings are different ; back at the axle housings you will need a -U- bolt and a piece of angle to mount the loader at the back ; the 190 has flat axle housings ; the 180 round and higher ; you bolt the angle on with the -U- bolt to the 180 axle housing , the angle hangs down to the loader frame ; either weld it or bolt it together . Whats wrong with the 190 ?? Would it be for sale ??
|
Posted By: BStone
Date Posted: 22 May 2010 at 1:45pm
|
Yes it would be for sale, the only thing is I am 40 miles south of Waco Tx.Its an older 190..clean but has engine problems..has not had the pan off or anything else to see how bad it is.I forgot to say that the front end loader is a KD brand.Mounts on the side plates so it doesn't go back to the rear axel.
|
|