Cummins powered Allis 180
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=127777
Printed Date: 28 Nov 2024 at 2:33am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Cummins powered Allis 180
Posted By: rowcropmafia
Subject: Cummins powered Allis 180
Date Posted: 24 Aug 2016 at 9:59pm
|
One-eighty for sale. 5.9 cummins powered. Roll cage. 18.4-38 double cut radial firestones. Runs 8th gear.Indoor smoke tube. Triple disk clutch. Lots of good parts. Weighs around 5000lb bare. Competitive in IPA outlaw class. Located in central Illinois. 217-255-3678 Ben |
Replies:
Posted By: DougG
Date Posted: 25 Aug 2016 at 6:58pm
| Is this the one on Pulloff for $25,000 ? |
Posted By: Dans 7080
Date Posted: 25 Aug 2016 at 7:17pm
|
Yup. ------------- When someone tells you Nothings Impossible, Tell them to slam a revolving door |
Posted By: DougG
Date Posted: 25 Aug 2016 at 7:20pm
| Its on YouTube , right? |
Posted By: JC-WI
Date Posted: 25 Aug 2016 at 10:21pm
Hope these are the right ones...Allis Chalmers Indecent Exposure 2016[TUBE]e1xetLvUAf8[/TUBE] [TUBE]eHvqC3AvK3A[/TUBE] ------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |
Posted By: DougG
Date Posted: 26 Aug 2016 at 4:03am
| Nice machine, she runs great! |
Posted By: rowcropmafia
Date Posted: 26 Aug 2016 at 9:23pm
| Yes, it is advertised on pulloff. It is a good running tractor. Very popular class in my area. If it sells i would like to build a light limited super. If it doesn't it won't hurt my feelings. I'm having a lot of fun with this one |
Posted By: DrAllis
Date Posted: 26 Aug 2016 at 10:55pm
| Maybe it's just two tough tracks, but I'm used to spinning things out instead of run-and-snuff. Need a gear between 7th and 8th ?? or lower the drawbar an inch ?? |
Posted By: rowcropmafia
Date Posted: 26 Aug 2016 at 11:48pm
| It could use a gear just a little slower than 8th. I have tried things like lowering the drawbar and tossing weight on the ground. Seems like you just lose your speed sooner and it doesn't get it any farther down the track. 7th in that tractor is 27/1 and it will light the tires like a buzz saw but it will be 10-20 foot short of the same pass in in 8th gear. The way the motor is set up currently it doesn't lug the best but seems to make up for it in the top end and holds the speed down the track better than most tractors in the class. I'll have to look in the results but if i remember right those videos are both 3rd place finishes in a class of 12-15 tractors |
Posted By: TeamAllis
Date Posted: 28 Aug 2016 at 7:40pm
| What does the tractor weigh in the videos, and what weight classes do you pull in? |
Posted By: rowcropmafia
Date Posted: 29 Aug 2016 at 9:48am
| 6500lb. I always pull that weight, that's all we have around here. We had 27 hooks with IPA this summer so i haven't been going anywhere else |
Posted By: TeamAllis
Date Posted: 29 Aug 2016 at 8:25pm
| We pull a 180 @ 6,700 lb. and we are running road gear and spin out on a good clay track. We have only 1 pull per month and there are 3 tractors. Ford 7000 4 cylinder and a 1655 Oliver. We put about 25 + feet on the Oliver. The tractor has really been a good runner, we are out to 360 cui, Allis 301 block. |
Posted By: O.P.S. Heads
Date Posted: 29 Aug 2016 at 8:27pm
| What size tires do you run? Do you have an A pump or a P pump? |
Posted By: TeamAllis
Date Posted: 29 Aug 2016 at 8:54pm
| Running a A pump but will probably go to a P pump this winter. We currently have a set of 24.5 X 32 Firestone single cuts and hope the club will vote in double cuts. |