D10, D12 D14 Grills
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=127578
Printed Date: 24 Jun 2025 at 6:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D10, D12 D14 Grills
Posted By: orangeman
Subject: D10, D12 D14 Grills
Date Posted: 21 Aug 2016 at 9:25am
| Since the 10,12 and 14 used the same engine -is it possible that the rad. grill shell can interchange from a D14 onto a D12? |
Replies:
Posted By: DSeries4
Date Posted: 21 Aug 2016 at 9:33am
|
No. D10 and 12 only have 1 connecting point at the top of the grille. D14 has 2.
------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: orangeman
Date Posted: 21 Aug 2016 at 9:49am
Thanks DSeries 4 - Am picking up a D12 that was rolled ~ radiator and grille got smacked so will need replacing ~ unless I driver her with no skirt.That would look rather odd - if anyone has a D10/D12 grill they could part with - kindly PM me. Thanks a Bunch... Orangeman
|
Posted By: Fred in Pa
Date Posted: 21 Aug 2016 at 9:57am
|
14 dose not wrap around the bottom ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: orangeman
Date Posted: 22 Aug 2016 at 5:20am
|
Thanks Fred and D Series IV - I have a hood so am all set there will be needing to limit the grill search to the D10 and D12's. Appreciate the good insights! Orangeman
|
Posted By: Charlie175
Date Posted: 22 Aug 2016 at 5:42am
|
Series 1/II Grill/shell is different than a Series 3 ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |