Print Page | Close Window

What's this? it's leaking oil

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=12649
Printed Date: 31 Jan 2025 at 6:02pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: What's this? it's leaking oil
Posted By: Dutchboy Johan
Subject: What's this? it's leaking oil
Date Posted: 19 May 2010 at 3:25am
I find out that it's something with the hydraulics, but it's leaking and it looks like its damaged. Can someone tell me how it should be or can post a picture of how it should be? And the other question is, can i repair this with new a sealing?
 
http://www.allischalmers.com/new/forum/uploads/865/IMG_0455_800_x_600.jpg - uploads/865/IMG_0455_800_x_600.jpg
 
http://www.allischalmers.com/new/forum/uploads/865/IMG_0454_800_x_600.jpg - uploads/865/IMG_0454_800_x_600.jpg


-------------
---> Better by Design <---

Johan Straver, Almkerk/ Netherlands

Allis-Chalmers 190XT Ser.III #26829XTD



Replies:
Posted By: Burgie
Date Posted: 19 May 2010 at 5:37am
That tube that goes to the sump has a seal on it.

-------------
"Burgie"


Posted By: skipwelte
Date Posted: 19 May 2010 at 9:50am

Both those tubes have a rubber seal on em.  Try tightening up the bolts that go thu the cast house as that will squeeze the seals tighter, might work, might not.  If not you need the rubber seals, drain all the oil, then take the oil manifold off, make it easier to put the seals on, will need an oil manifold gasket too, then you can clean it out too.  This is a common leak on 190s and 200s.  HTH



Posted By: Dutchboy Johan
Date Posted: 21 May 2010 at 3:22pm
In the picture below you see 2 arrows that i drew. Is hole normal? It looks to me that it's damaged by something. If it so i would like to try to fix it. 
 


-------------
---> Better by Design <---

Johan Straver, Almkerk/ Netherlands

Allis-Chalmers 190XT Ser.III #26829XTD


Posted By: CTuckerNWIL
Date Posted: 21 May 2010 at 4:07pm
Sure looks like something is bent to me.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net