Construction and other equipment

Print Page | Close Window

Hd5g parts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=126252
Printed Date: 31 Oct 2025 at 3:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Hd5g parts

Posted By: DavidnTenIll
Subject: Hd5g parts
Date Posted: 23 Jul 2016 at 8:31am

Looking for hd5g engine clutch shaft and front yoke with good tight splines.

Replies:

Posted By: Dozer
Date Posted: 23 Jul 2016 at 4:26pm

General Gear Please post if you find a new yoke.

Posted By: Coke-in-MN
Date Posted: 23 Jul 2016 at 6:59pm

that front yoke might be a problem as I found 1 out of about 8 I checked -

Clutch shaft - around but also hard to find a good one with no wear - couple I had were worn at pilot bearing end as well as splines .

check that brass bushing in the throw out bearing area also for wear as that will cause shaft to wobble . I turned a new one from brass bearing I took from metal polishing machine

-------------
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.

Posted By: DavidnTenIll
Date Posted: 23 Jul 2016 at 7:30pm

Yep contacted GG but haven't heard anything back yet. Appreciate the responses.

Posted By: gemdozer
Date Posted: 24 Jul 2016 at 10:03am

I have a cluch shaft 19inchs longues and have 1 yoke with U bolts and 1 with joint bolt on yoke

Posted By: DavidnTenIll
Date Posted: 24 Jul 2016 at 4:55pm

Gem dozer I sent you message should be in your inbox. David.

Posted By: DavidnTenIll
Date Posted: 27 Jul 2016 at 4:34pm

Gem dozer sent you message and email to your inbox.
David.