Kudos - Steve B&B Custom Circuits
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=125905
Printed Date: 23 Jun 2024 at 1:42pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Kudos - Steve B&B Custom Circuits
Posted By: DPrestonOH
Subject: Kudos - Steve B&B Custom Circuits
Date Posted: 14 Jul 2016 at 11:13am
|
I want to really thank Steve at Custom Circuits for all his help with getting my D14 rewired. He supplied a new harness and alternator kit and it worked great. I got this from him a couple of years ago but only now had time to install it. Being a novice with most things electrical, I had many questions about what went where and even some questions double checking my work with him to make sure I didn't inadvertently fry something. He was patient and prompt in responding to my questions. Best of all the man is a wealth of knowledge, is willing to share, and he understood and knew exactly what I asking about which helped me immensely. Even a greenhorn like me was able to complete this whole rewire thanks to him. Every thing is working great now. Thanks so much Steve!! I definitely recommend him!!! |
Replies:
Posted By: Rick
Date Posted: 14 Jul 2016 at 11:42am
| Steve is a top notch, A-1 type guy!!! Rick |
Posted By: JoeM(GA)
Date Posted: 14 Jul 2016 at 12:17pm
|
Go short guy! Steve is a great guy with a wealth of knowledge! ------------- Allis Express North Georgia 41 WC,48 UC Cane,7-G's, Ford 345C TLB |
Posted By: CrestonM
Date Posted: 14 Jul 2016 at 12:39pm
I've fried a radio before. The thing was new, too!! Turned out the thing was positive ground! Phfff! That kind of thing isn't fun. I recommend Steve too! He rebuilt my distributor for my B, and it went from barely running, to running top notch!
|
DPrestonOH wrote:Posted By: Steve in NJ
Date Posted: 14 Jul 2016 at 5:40pm
|
Let me first say Thank You Dick for purchasing one of our wiring systems! It doesn't matter how long it takes to get it installed, cause when you finally get the time to install the system, I always try to be there for the customer with help and information if needed. Even if I don't remember what I built two years prior! LOL!! See, that wasn't so tough after all was it. Ya did great man! Have many years of fun with your Tractor. Glad to help out anytime, and thank you for the kind words! Steve@B&B ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |
Posted By: Don(MO)
Date Posted: 14 Jul 2016 at 6:08pm
|
Steve is one of the good guys (no white hat?) he is a big help in the world of wiring. OK we need to stop telling short round just how good he is because I'm thinking it might give him a big head and all. lol ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Posted By: Fred in Pa
Date Posted: 15 Jul 2016 at 11:23am
|
He can get a LITTLE WIRED sometimes .Keep up the good work. He is not short of wiring knowledge . ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: Bull
Date Posted: 15 Jul 2016 at 4:38pm
|
Now Fred, That thar is funny I don't care who you are. ------------- WD45 Diesel, RC,CA,IB, B, G, 616, Early B-10, D-10, Terra Tiger, 95G spreader, SC blade |