Snapcoupler subsoiler
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=12588
Printed Date: 31 Jan 2025 at 1:58pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Snapcoupler subsoiler
Posted By: steve(oh)
Subject: Snapcoupler subsoiler
Date Posted: 17 May 2010 at 6:14pm
|
Had a guy wondering if it was possible to convert a pre snapcoupler subsoiler to fit a snapcoupler tractor.(take a eye off a plow and bolt it to the subsoiler). I told him the only thing that worries me is if the length of the subsoiler would be to long. Did not know if anyone on here has ever messed with converting one?
|
Replies:
Posted By: bigfish_Oh
Date Posted: 17 May 2010 at 6:38pm
I just leave a wore out drawbar on it.
-------------
1941 WC sat for 29 years,started & dynoed 27 h.p.
1957 WD45 Grandpa bought new,factory p.s.,added wfe
1951 WD, factory p.s.
1960 D14 HnMk IV BkHoe 4 sale
2014 HD Tri Glide
2009 GMC CC SLT Dually
|
Posted By: NCAllisnut
Date Posted: 17 May 2010 at 7:34pm
|
Mine was a pin hitch, I think. It is not made like the drawbar mounted subsoilers. The lift arms are made to bolt to the lift arms on the tractor. After seeing the pictures of the 3 bottom plow flipped upside down on the seat, I am not so sure it is a good idea to bolt lift arms on!
Adam
|
Posted By: CTuckerNWIL
Date Posted: 17 May 2010 at 7:45pm
Adam, The bolted lift arms are OK with a pin hitch, unless the pin breaks.
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: Rfdeere
Date Posted: 17 May 2010 at 9:22pm
Back to the original ? , assuming it is a pin hitch presently, yes it will work if it is switched to an eye and has the pin arms put on for lift latches.
-------------
Randy Freshour,Member Indiana AC Partners,
http://www.rumelyallis.com" rel="nofollow - http://www.rumelyallis.com
|
Posted By: bigfish_Oh
Date Posted: 17 May 2010 at 11:33pm
REMINDER TO SELF :
add safety chain
get clutch kick out put on
convert bolt ons to latch pins
-------------
1941 WC sat for 29 years,started & dynoed 27 h.p.
1957 WD45 Grandpa bought new,factory p.s.,added wfe
1951 WD, factory p.s.
1960 D14 HnMk IV BkHoe 4 sale
2014 HD Tri Glide
2009 GMC CC SLT Dually
|
|