190 crooked fan belt
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=125283
Printed Date: 26 Jun 2024 at 4:39am Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190 crooked fan belt
Posted By: DSeries4
Subject: 190 crooked fan belt
Date Posted: 30 Jun 2016 at 9:52pm
Am I missing something here? Put the water pump and fan assembly back on the engine and set up the alternator with the new belt. The fan pulley lines up nicely with the outer pulley on the crank, but the alternator lines up with the INNER pulley on the crank. Do I have the right pulley on my alternator? The alternator came with the tractor, but I suspect it may have been changed at some point in its life. Can someone give in an idea of what the correct alternator pulley looks like?
http://s526.photobucket.com/user/szalmyr/media/190XT/DSC04368_zpsrpszlxu8.jpg.html" rel="nofollow"> http://s526.photobucket.com/user/szalmyr/media/190XT/DSC04367_zpsm6ymigqy.jpg.html" rel="nofollow">
------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Replies:
Posted By: KY poorboy
Date Posted: 30 Jun 2016 at 9:56pm
Would the outside of a double pulley align with your others? Just a thought.
|
Posted By: DrAllis
Date Posted: 30 Jun 2016 at 10:11pm
Pulley goes on first, then the SPACER, then the fan. Use inside groove on crank pulley.
|
Posted By: DSeries4
Date Posted: 30 Jun 2016 at 10:15pm
Thanks Doc, that makes sense. I should have looked up my old pics!
------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: MACK
Date Posted: 30 Jun 2016 at 10:16pm
Or hub was not pressed on water pump far enough. MACK
|
Posted By: Beirnesy
Date Posted: 30 Jun 2016 at 11:10pm
mine is pulley, spacer, fan, and belt on inside groove. BTW paint looks awsome, would you share with us what brand of paint you are using. Thanks
------------- 1969 220,1967 190DXT,1968 190DXT, LGT's 710,,716
|
Posted By: SHAMELESS
Date Posted: 01 Jul 2016 at 3:34am
Posted By: Stan IL&TN
Date Posted: 01 Jul 2016 at 8:37am
SHAMELESS wrote:
can shim the alternator
|
Me thinks that this would not be acceptable at this juncture.
------------- 1957 WD45 dad's first AC
1968 one-seventy
1956 F40 Ferguson
|
Posted By: Gerald J.
Date Posted: 01 Jul 2016 at 9:26am
I used me vertical milling machine to cut slots in the bent steel alternator bracket to allow aligning the pulleys on my gas 4020.
Gerald J.
|
Posted By: DSeries4
Date Posted: 01 Jul 2016 at 10:18am
Beirnesy wrote:
mine is pulley, spacer, fan, and belt on inside groove. BTW paint looks awsome, would you share with us what brand of paint you are using. Thanks |
Has 2 coats of AGCO corporate orange on top of 2 coats of grey primer. There is going to be a lot of touch up to do once I get this engine put back together!
------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|