Farm Equipment - 7040 help

Print Page | Close Window

7040 help

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=12507
Printed Date: 31 Jan 2025 at 8:56am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7040 help

Posted By: mr t
Subject: 7040 help
Date Posted: 15 May 2010 at 11:05pm

Three point goes up but not down. Linkage is free from valve so is the valve just sticking or could lt be the feedback spool?

Replies:

Posted By: DrAllis
Date Posted: 16 May 2010 at 8:03am

Removal of the tin cover on the rear of the 3 pt valve will gain you access to the feed back spool and spring. I have had a couple occasions of needing to add a plain old lockwasher to the spring to gain some extra pressure to help with this problem. While you have that cover off, you can remove the snap ring from the end of the valve spool and slide it more forward and spray some penetrating oil of some kind on it (front side)and work it back and forth to help maybe free things up.