Farm Equipment - Weak clutch 190XT, how to find out wich one?

Print Page | Close Window

Weak clutch 190XT, how to find out wich one?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=12482
Printed Date: 31 Jan 2025 at 8:51am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Weak clutch 190XT, how to find out wich one?

Posted By: Dutchboy Johan
Subject: Weak clutch 190XT, how to find out wich one?
Date Posted: 15 May 2010 at 9:23am

A few months ago i posted this also but i can't find it anymore. It was on the old forum.

One of my clutch'es from my 190XT is weak. But how can you find out wich one it is?

I've read something about activate the pto and put them in 8th gear and hold it on the brake's. I would like to know how i can see wich of the clutches is bad. i also find out that the left rear wheel will pull harder then right when i hold the brakes on it. The brakes are even strong on both side.

-------------
---> Better by Design <---

Johan Straver, Almkerk/ Netherlands

Allis-Chalmers 190XT Ser.III #26829XTD

Replies:

Posted By: tbran
Date Posted: 15 May 2010 at 11:14am

slip the clutch, if the pto stops it is the foot clutch , if the pto keeps turning it is the power director - check low range and high range

Posted By: Dutchboy Johan
Date Posted: 16 May 2010 at 6:12am

Thanks for it. I will find out wich one it is.

And futher, when i will overhaul the clutch. Is it better to buy a stronger clutch from a 7000 series or can i use also a clutch of a 200?

-------------
---> Better by Design <---

Johan Straver, Almkerk/ Netherlands

Allis-Chalmers 190XT Ser.III #26829XTD

Posted By: DrAllis
Date Posted: 16 May 2010 at 7:57am

Foot clutch parts are the same. If you need discs in the PowerDirector clutch, use discs from a maroon 7000 (pn 70261212 I think)....they will never break in pieces like the old ones.

Posted By: Dutchboy Johan
Date Posted: 16 May 2010 at 1:07pm

And because I live in the Netherlands as you know, i'm not an expert where i can find these parts.

Is this still available by Agco dealers and what will it cost?

-------------
---> Better by Design <---

Johan Straver, Almkerk/ Netherlands

Allis-Chalmers 190XT Ser.III #26829XTD