718 hydro
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=124537
Printed Date: 27 Nov 2024 at 2:24am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 718 hydro
Posted By: AC puller
Subject: 718 hydro
Date Posted: 13 Jun 2016 at 5:06pm
|
So what makes the hydro rearend not move when u start it up untill i rev it up?
|
Replies:
Posted By: talntedmrgreen
Date Posted: 14 Jun 2016 at 8:38am
Most commonly, slipping drive belt or low fluid.
-------------
Patterson B1*B1/B1Forklift*B10*BigTen/B1Loader*B110*B208*B206*616*Homelite T16H/T8/T7/RM7E*Landlord/Loader/Trencher*Broadmoor717*Serf525*2110*7790*Legacy XL*Twin 20*Squire9*Squire6*JCPenny 494
|
Posted By: Steve in NJ
Date Posted: 14 Jun 2016 at 9:18am
First thing I would do is a fluid change and go from there. Like TMG said, might be low on fluid.
-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
Posted By: AC puller
Date Posted: 14 Jun 2016 at 7:33pm
|
I restored this tractor a few years ago.All new but rearend.Had broken axel when i got it and no fluid. Sat for a few years before i got it.It always worked but would slow down on a grade then speed up going down.Been slowly getting worse.Last few months when i start it it will sit there and not move till i rev it up. Other day started up and took a good 5 minutes to get it to move. Changed fluid this spring and filter. Fill tube set to the book.Right amount of fluid.To the book.Definatly not the belt.Is there a valve that could be sticking?
|
|