Construction and other equipment - pto shaft for a hd5

Print Page | Close Window

pto shaft for a hd5

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=120873
Printed Date: 27 Jul 2025 at 9:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: pto shaft for a hd5

Posted By: serioussam
Subject: pto shaft for a hd5
Date Posted: 24 Mar 2016 at 6:04pm

does anyone know of any parts places in US or Canada where I could find a pto shaft thanks

Replies:

Posted By: Coke-in-MN
Date Posted: 24 Mar 2016 at 7:04pm

PTO ? what shaft ? the one from clutch housing to transmission or something else ?

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: serioussam
Date Posted: 24 Mar 2016 at 7:20pm

The one to power a winch at the back

Posted By: DMiller
Date Posted: 25 Mar 2016 at 6:31am

Try Zimmerman Tractor Versailles MO, he seems to find a great deal of old Allis AG crawlers with PTO out the back, may have spares.

http://www.crawlerbulldozer.com/default.htm

Posted By: TramwayGuy
Date Posted: 25 Mar 2016 at 11:37am

Hector Gemme, maybe? On this site as 'Gemdozer'....I think he is in Quebec.

Posted By: gemdozer
Date Posted: 25 Mar 2016 at 11:56am

I check tomorrow if am still have 1 pto-sfaft for HD5

Posted By: serioussam
Date Posted: 25 Mar 2016 at 12:27pm

Hey that would be great ,would u happen to have a coupler also
Thanks

Posted By: gemdozer
Date Posted: 26 Mar 2016 at 1:50pm

I have a pto shaft 15 inchs long with a coupling each end and on side he fitt on the transmission shaft and the other coupling is smaller inside 1.364 inchs with six spleenes too

mailto:gemdozer@hotmail.com" rel="nofollow - gemdozer@hotmail.com

Posted By: serioussam
Date Posted: 26 Mar 2016 at 2:18pm

I sent you an email thanks