Broke my 1963 B10 Bevel Gear Box
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=119044
Printed Date: 26 Nov 2024 at 8:35pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Broke my 1963 B10 Bevel Gear Box
Posted By: ezeerider
Subject: Broke my 1963 B10 Bevel Gear Box
Date Posted: 15 Feb 2016 at 7:16pm
|
Well, I was blowing snow during that last big snow storm and I blew up the bevel gear box on my 1963 Allis Chalmers B10. I didn't destroy the case, the ball bearing race disintegrated, the balls were still in there, but only half a race, and the needle bearing and seal were gone, several teeth broke off of both bevel gears. I believe the keyway in the yoke is toast too, because it just fell off and the key was more of a triangle than a square. So I am looking for an entire bevel gear box part number 154062 with shafts, bearings, bevel gears, keys and seals OR just the bevel gears, ball bearing, driving shaft needle bearing and seal and a yoke. I also bent the PTO pulley trying to get it off with a puller. Apparently I need a different tool. Here are some sad pix:
 Notice how the race split in half and then broke into 3 pieces. Chewed up the bevel gear teeth bad.  The balls are still there but the race is broken.  This is the box I need 154062...... OR.... just the parts below. Can anyone help me out?  |
Replies:
Posted By: AaronSEIA
Date Posted: 16 Feb 2016 at 5:58am
|
The gears can be found on eBay. I think there is a set of two up there now. The bearings should be easy to find. Just go to a good parts store with the Simplicity numbers and they should be able to cross them. AaronSEIA |
Posted By: ezeerider
Date Posted: 19 Feb 2016 at 9:58am
|
Thanks... just bought the bevel gears. |