Print Page | Close Window

Off color but need help

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=118922
Printed Date: 26 Nov 2024 at 9:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Off color but need help
Posted By: Ronnie
Subject: Off color but need help
Date Posted: 12 Feb 2016 at 11:28pm
I just got a jd 265 with Kowalski 17 hp engine on it I hot it turning over it has compression but popes and blows flames out intake. I set the valves and still no good. I put my hand over carb it sucks in not out. Put my hand over exhaust and it blows out.
It has spark. I checked the key on fly wheel it looks ok.
Any one no any thing about these engines.
Please help.



Replies:
Posted By: CTuckerNWIL
Date Posted: 13 Feb 2016 at 8:42am
Either the intake valve is hanging up (at least sometimes) or the timing is off blowing fire out before the valve gets shut.


-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF


Posted By: Gordy
Date Posted: 13 Feb 2016 at 9:48am
I have a 17hp Kow on my zturn lawnmower had something like that with a bad coil got a new coil from NAPA and it would run on only one cyl had to get a new coil from Kow to fix it.

-------------
“If you can't explain it simply, you don't understand it well enough”


Posted By: HudCo
Date Posted: 13 Feb 2016 at 11:29am
as  c tucker says those kawis have probley got a stuck valve or bent push rod or only fireing  one cyl. did you pull the flywheel off to check the key?   most small engines you cant see both keyways with the wheel on   also alot of kawaskis have a ignition modual that goes bad and coil is still good if the modual is bad go to your local mower shop  and get the uniersal modual 


Posted By: Ronnie
Date Posted: 14 Feb 2016 at 3:39pm
Ok I pulled the flywheel off the key is not shred, I put a new plug in and flushed carb and put fresh gas in. Fuel pump is workingand pumping gas to carb. I checked for bent push tubs, tubs are good. It seamed to have good compression. It is blowing flame out both intake and exast. It does have spark it just seams to be at the rong time. The guy I got the tractor from said he replaced the ignition modual. I was wondering if it was possible that the modual is for the rong engine. Like maby for a two cylinder instead of a single cylinder.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net