New creeper
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=117366
Printed Date: 27 Nov 2024 at 1:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: New creeper
Posted By: ac fleet
Subject: New creeper
Date Posted: 11 Jan 2016 at 12:10am
|
This is a start on my creeper #3 that I think I have a fair selection of parts to move forward on the construction of! Garden Creeper Track [URL= http://s26.photobucket.com/user/SonnyReese/media/PictureL056.jpg.html%5d%3cimg%20src=" rel="nofollow">[/URL">http://s26.photobucket.com/user/SonnyReese/media/PictureL056.jpg.html] Garden Creeper Track Corner View [URL= http://s26.photobucket.com/user/SonnyReese/media/PictureL055.jpg.html%5d%3cimg%20src=" rel="nofollow">[/URL">http://s26.photobucket.com/user/SonnyReese/media/PictureL055.jpg.html] The track is just sitting on wood blocks so I could get some measuring done and see how things might fit up!---I don't have blueprints to work from,--only ideas in my head, so a LOT of testing/changing/etc. will probably be in order! thanks; ac fleet |
[/URL
[/URLReplies:
Posted By: SHAMELESS
Date Posted: 22 Jan 2016 at 4:53am
| looks good so far...that's how I build a lot of things too...ideas and dementions in my head! |
Posted By: ac fleet
Date Posted: 26 Jan 2016 at 1:04pm
| I now have the grousers beveled and the center hole drilled and all welded to the chain.--wanted to complete one side and see how worked with hydraulic motor installed and hooked to tractor hydraulics for testing, and then if all looks ok,--- start on the second track build!----after getting both tracks operational, then I can make the main frame to mount them on and all the directional valves/hyd. pump/engine/res. etc. thanks; ac fleet |
Posted By: ac fleet
Date Posted: 26 Jan 2016 at 8:35pm
|
http://s26.photobucket.com/user/SonnyReese/media/Our%20Garden%20Pictures/Track1.jpg.html" rel="nofollow">  Here is a pic. of the grousers welded onto the track chain, also note the beveled ends, which I hope will help let it slide sideways easer when turning!--the holes in the center of each grouser, I hope will let the dirt out and not pack up under the sprocket teeth! thanks; ac fleet
|