hd5
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=116760
Printed Date: 25 Jul 2025 at 9:54pm Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: hd5
Posted By: jturano11
Subject: hd5
Date Posted: 28 Dec 2015 at 1:55pm
I hear I can replace track adjusters on my hd5 with hyd ones,anyone know where to order them or anything about it? Thanx
|
Replies:
Posted By: CAL(KS)
Date Posted: 29 Dec 2015 at 9:33am
look here
http://www.hendersonmfgco.com/products/prod_hydra.htm" rel="nofollow - http://www.hendersonmfgco.com/products/prod_hydra.htm
they also mfg new sprocket rings
------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
Posted By: jturano11
Date Posted: 30 Dec 2015 at 12:24am
Awsome,can't thank you enough.while I go the tracks apart I'll have to fix a final drive leak.any ideas of where to buy the seals?
|
Posted By: jturano11
Date Posted: 30 Dec 2015 at 12:29am
I can tell just by the looks of things it's going to be a not so easy job I'll have to post something for some advice I never replaced these seals before I keep losing oil from left side.
|
Posted By: CAL(KS)
Date Posted: 30 Dec 2015 at 8:31am
if anyone has the parts new http://www.minnpar.com" rel="nofollow - http://www.minnpar.com will. otherwise you may have to get good used. can also view parts books on their site
------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
Posted By: gemdozer
Date Posted: 30 Dec 2015 at 11:17am
I have some new ring seals and boots ass for outboard bearing and should have some boot ass spring for the rear sprocket
|
Posted By: gemdozer
Date Posted: 30 Dec 2015 at 1:57pm
Before removed the track for changing the seals make sure the big nut on sprocket shaft is't loose
|
Posted By: Coke-in-MN
Date Posted: 30 Dec 2015 at 3:50pm
to change the seals you will need to drop truck frame from machine as well as disassemble outboard bearing on the truck frame that supports the axle shaft . Some work is involved in the full process - check archived posts in this section for info .
------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
|