#7 sickle bar mower
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11661
Printed Date: 25 Jun 2024 at 9:09pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: #7 sickle bar mower
Posted By: LarryWC In
Subject: #7 sickle bar mower
Date Posted: 28 Apr 2010 at 2:25pm
anyone have parts for one?(#7 sickle bar mower)
-------------
www.allischalmersmuseum.com
|
Replies:
Posted By: Don(MO)
Date Posted: 28 Apr 2010 at 3:03pm
|
Yes Larry I have a #7 parts mower sitting out back, What do you need for yours?
Don
-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
Posted By: LarryWC In
Date Posted: 28 Apr 2010 at 3:12pm
|
I need the rear balance pivot bar support,,(and hardware,,pivot bushing and whatever shims or bushings go with it),,and I also front ballance support.
sure would be groovey if you had them!
Thanks!,,,,,,,,,,(have you ever been groovey?)
-------------
www.allischalmersmuseum.com
|
Posted By: Don(MO)
Date Posted: 28 Apr 2010 at 3:49pm
|
I'm at work right now, I will look tonight and post back after I see just what is left on there, It might be after 8:PM.
Don
-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
Posted By: Don(MO)
Date Posted: 28 Apr 2010 at 6:16pm
|
OK Larry, please send me a photo of the mower parts or where they go on the mower, Just to make sure we are talking about the same parts here. If we are talking about the same stuff then I have all that on this mower out back.
Don
-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
Posted By: LarryWC In
Date Posted: 28 Apr 2010 at 6:50pm
OK,,let me dig up a drawing here,,,,,,Thank you for your help!
-------------
www.allischalmersmuseum.com
|
|