Garden Tractors - Briggs won"t fire

Print Page | Close Window

Briggs won"t fire

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=116544
Printed Date: 26 Nov 2024 at 8:23pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Briggs won"t fire

Posted By: JohnCO
Subject: Briggs won"t fire
Date Posted: 23 Dec 2015 at 1:54pm

I picked up a Simplicity 8 horse walk behind tractor yesterday that was owned by a friend who passed away over a year ago. His widow finally decided she would never use it but hated to lose something her husband enjoyed. It has set outside for almost two years. I brought it in the shop and messed around with it a bit, pulled the spark plug and turned it over, no spark. took the cover off the points and they didn't look real clean so took them off and filed them a bit. Putting them back on I may have messed up the gap adjustment screw as it looks like the nut is broken from the rest of the brass piece between the points and engine block. How are the points adjusted? I cranked it over (rope starter) several times but couldn't see a spark either at the points or plug. Any ideas? Thanks in advance.

-------------
"If at first you don't succeed, get a bigger hammer"
Allis Express participant

Replies:

Posted By: ac fleet
Date Posted: 23 Dec 2015 at 5:37pm

be sure to clean the flywheel magnets and the coil legs too!---coil ,condenser, and points may be bad!

I run into that a lot on these engines! thanks; ac fleet