AGCO Allis 9650
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=11645
Printed Date: 29 Sep 2024 at 3:21pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AGCO Allis 9650
Posted By: SeanD17
Subject: AGCO Allis 9650
Date Posted: 28 Apr 2010 at 9:22am
|
Hello everyone,
I'm looking at a 9650 AGCO Allis. It's a 1994, serial #941030, 7130 total hrs. with 2000 of those hours on second engine, engine is the air cooled Deutz, 1000 PTO, full front weights, 14.9 x 30's in the front, 18.4 x 42's in the rear w/ duals, good condition--clean and straight inside and out, shop that put engine in 2 years ago also did $3000 worth of trans. work but I don't know what they did, it's an 18 speed pwr. shift. I don't know anything about these and was wondering if anyone could tell me the pro's and con's of this potential deal. They are asking $34750 for the tractor now, that's reduced some from first price as they have had the tractor on the lot for a while. Also the the shop told me it dyno's out at 190 H.P. and that most of them they work on do even though the "book" says that tractor is rated less H.P. than that. Any input would be appreciated.
Thanks, Sean
|
Replies:
Posted By: Charlie175
Date Posted: 28 Apr 2010 at 9:53am
|
Only 5,000 hours out of an engine before it had to be replaced? I thought the air cools were tough? ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: SeanD17
Date Posted: 28 Apr 2010 at 11:58am
| I always heard the same thing Charlie--tough motor, good longevity etc--maybe somebody didn't keep the fins clean? |
Posted By: ac45
Date Posted: 28 Apr 2010 at 12:03pm
| I cant say anything as to the good or bad, but i know around here resale really is terrible on those tractors with the deutz. so Personally id would want to try to buy at wholesale price on something like that rather than retail, so if you ever want to trade you dont loose as much. |
Posted By: SeanD17
Date Posted: 28 Apr 2010 at 12:22pm
|
Thanks ac45, I agreee but I don't know what that price would be or how to find out, all I know is local dealer has had for a while and come down in their ad from 37 or 38000 to 34750. Not sure what to offer? |
Posted By: Dale-OH
Date Posted: 28 Apr 2010 at 1:49pm
|
I dont think that the price is out of line if the tractor looks good. I think the last 9630 MFWD that I sold had 5000 hrs and short axle ( NO DUALS ) for $37 but that has been a year or so. This tractor is bigger with long axles and duals, but does have a few more hours. |
Posted By: Charlie175
Date Posted: 28 Apr 2010 at 3:03pm
|
Nebraska test data: http://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=3038&context=tractormuseumlit - http://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=3038&context=tractormuseumlit Must be this tractor? http://www.equipmentlocator.com/asp/eDetails/AGCO/eqID/697755/eID/1/loc/na-en/close/yes/ - http://www.equipmentlocator.com/asp/eDetails/AGCO/eqID/697755/eID/1/loc/na-en/close/yes/  ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: Charlie175
Date Posted: 28 Apr 2010 at 3:08pm
|
Here is another one listed for $37,000 http://www.fastline.com/v100/details.aspx?g=1d53451f-e445-455a-8900-935fc61ff85e - http://www.fastline.com/v100/details.aspx?g=1d53451f-e445-455a-8900-935fc61ff85e  ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: SeanD17
Date Posted: 29 Apr 2010 at 7:17am
| Thanks Dale and Charlie for the input and yes that is the one I'm looking at, hope I can get it bought. |
Posted By: Kevin(Alabama)
Date Posted: 29 Apr 2010 at 8:18am
|
I have a 9690 with the Deutz and I think it is one of if not the best running engines out there. I also think they are underrated in H.P.
Yall say "just 5000 hours", well any fool can ruin a engine. They all have to have some care. Thats like saying a two year old car should not have been wrecked and blame it on the car. I have seen these Deutz with over 10000 hours on them. The Deutz would not make me spend less on it if I liked it. ------------- "I would die a thousand deaths before I would betray a friend."...Sam Davis, Nov. 27, 1863.....DEO VINDICE |
Posted By: Russ-neia
Date Posted: 29 Apr 2010 at 2:29pm
|
Saw a clean 9670 FWA 5500 hours sell locally at auction in early March for $24,000. ------------- The innovators offer what others will imitate. |
Posted By: DrAllis
Date Posted: 29 Apr 2010 at 5:43pm
| I've had two bad experiences with that model FWA tractor and both tractors were engine issues (blown head gaskets/leaking compression between jug and cyl head). When configured as an FWD and a lot of tires(traction), the engine is worked too hard continuously and HP should have been left at 130 instead of 155 (kind of like a 7580 AC)Also the park lock inside was weak and expensive to fix. Good luck, because once you buy the Deutz, it's yours. |
Posted By: Pete from IL
Date Posted: 29 Apr 2010 at 10:15pm
| You can do what you want but for 35 grand I would want a tractor with a lot less hours on it than 7000. I have a 9670 FWA and it has been a very good tractor. I was told the bigger engine of 9670 and 9690 are more reliable than the smaller engine of the 9630 and 9650.Dr. Allis is right, the smaller engine has to work hard all the time. I think the cubic inches are 379 for the small motor and 584 for the big one. |
Posted By: murphy
Date Posted: 30 Apr 2010 at 4:48pm
| Wow a 379 putting out 190 hp like dr allis said thats worse than what they were doing to the 426 |
Posted By: nowversatile
Date Posted: 30 Apr 2010 at 6:09pm
| I leased a 9650 like the one you are looking at a few years ago. I found it to be a very nice tractor to run and super fuel efficient. Having been around Deutz air cooled in a previous industry in desert conditions, I am a strong believer in these engines as they were essentially bullet proof. However, in this case, this tractor is at least $5K overpriced in my view considering the number of hours. Best of luck, if you buy it right, you should be happy with it. |
Posted By: MACK
Date Posted: 30 Apr 2010 at 9:55pm
| A 9635 sold at auction today with 2700 hrs for 28 or 29000. Front wheel ast. 42" tires and dules. MACK |
Posted By: SeanD17
Date Posted: 03 May 2010 at 6:30am
|
Thanks to all for your input. ------------- D14 N.F., Series lll D17 N.F, 3 Bottom Snap Coupler Plow, 4 Bottom Slat Snap Coupler Plow. |