720, add 3 point arms
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=115061
Printed Date: 26 Nov 2024 at 8:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 720, add 3 point arms
Posted By: JW in MO
Subject: 720, add 3 point arms
Date Posted: 22 Nov 2015 at 8:57am
Need advice on adding 3pt to a 720. It currently has a mower deck but not the 3pt. I realize it would be best to find a salvage unit but I need to know what all is involved. I don't have the second lever but do I need a different control valve? Is the rock shaft different on the 3pt models?
-------------
Maximum use of available resources!
|
Replies:
Posted By: den/southern illinoi
Date Posted: 22 Nov 2015 at 9:53am
Sounds to me that you have a 720 Special for which the 3 point and rear PTO were options. Also a single hydraulic lever that controlled both the front and rear hydraulics.
Yes the rock shaft is different on a 720 and a 720 Special. The Special did not have the extra arm that the drop links hooked to for the 3 point. Also would be missing the mounting bracket for where the lower lift arms attached to the tractor. Of course you need the drop links and lower links and I would also think that you need the anchor for the top link (3rd point) as I do not think they were on the 720 Special.
As far as having 2 levers on the hydraulics...yes you would need it if you wanted to control the front outlets and the rear lift for two items at the same time. Your single lever now controls both ends so if you were using the belly mower, it would take care of that. If you put a blade only on the back, still good. A front blade only...good. Now for example you wanted to mount a front and back blade at the same time, the single lever would lift and lower both at the same time...not so good. The dual valves and piping come up available on E Bay and sometimes in the classified here to convert to a dual system.
Hope this helps. Den
-------------
Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts.
|
Posted By: Gary
Date Posted: 03 Dec 2015 at 7:38am
Looks like you need this set-up
Gary
http://www.ebay.ca/itm/ALLIS-CHALMERS-720-SIMPLICITY-9020-3-POINT-HITCH-cat-1-/121813418326?hash=item1c5ca54156:g:KuAAAOSw9mFWKV14
|
Posted By: JW in MO
Date Posted: 04 Dec 2015 at 5:29pm
I looked at that Gary but it is missing the cylinder, hydraulic lines, and other stuff. I'm considering selling it in the spring, getting lazy the older I get.
-------------
Maximum use of available resources!
|
|