Construction and other equipment

Print Page | Close Window

bearing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=113543
Printed Date: 19 Jul 2025 at 11:58pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: bearing

Posted By: Randaleky
Subject: bearing
Date Posted: 20 Oct 2015 at 8:45am

anyone have bearings for fan shaft on allis hd4 dozer at reasonable price ? part # 245114

Replies:

Posted By: Coke-in-MN
Date Posted: 20 Oct 2015 at 9:45am

isn't it a 2 bolt flange bearing ?

if my picture of shaft and support brackets are close the bearing bolted to upright .

should be able to come up with something

Allis Chalmers HD4 fan shaft bearing part # 245114

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&cad=rja&uact=8&ved=0CC8QFjADahUKEwi6z-2vpdHIAhVI7WMKHUs6Dtc&url=http%3A%2F%2Fstephensequipment.com%2Fdatabase.html&usg=AFQjCNEGR69xfBkB6bnLYvGVBLRWxB_cCg&sig2=4raGrr4a9KxJ41K_fHd2_w

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: Randaleky
Date Posted: 20 Oct 2015 at 11:20am

yes it is 2 bolt flange

Posted By: Coke-in-MN
Date Posted: 20 Oct 2015 at 9:11pm

any bearing house should be able to supply or measure shaft and might find at tractor supply or other farm service store .

If I knew the shaft size I probably have some in my parts bin - have 400/500 bearing I got when shop closed - rather than trash them I figured some day I could use them - have fixed spindles on several mowers , built few other things with them but 2 1/2 " 4 bolt flange bearings for air handlers I have not come up with use for YET .

Posted By: Randaleky
Date Posted: 20 Oct 2015 at 9:50pm

thanks coke. I have not pressed the old bearings off yet. I do have an hd4 loader for spare parts and I pulled the fan shaft out. seems that the bearings had been replaced recently. they are tight so I installed it into the dozer. I still want to find two bearings for spares. they don't seem to last long.

Posted By: steve(ill)
Date Posted: 21 Oct 2015 at 7:23pm

bearings are generic parts like bolts. Like COKE said, they sell the two bolt flange bearings at the local Farm Store, Bearing house, NAPA, etc....... you just have to measure the shaft size and bolt to bolt center line dimension.

-------------
Like them all, but love the "B"s.

Posted By: Randaleky
Date Posted: 21 Oct 2015 at 8:34pm

thanks , will do

Posted By: Coke-in-MN
Date Posted: 22 Oct 2015 at 1:44pm

8 years and never had problem with those bearings - sold machine and never replaced them in full time i had it .

if they have went out before - look to see if mounting is loose or bent causing load problems or shaft is bent - that will destroy bearings fast if vibration or flexing of the shaft .