Garden Tractors - 720 seat is too low?

Print Page | Close Window

720 seat is too low?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=112843
Printed Date: 26 Nov 2024 at 8:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 720 seat is too low?

Posted By: Herb(GA)
Subject: 720 seat is too low?
Date Posted: 04 Oct 2015 at 12:17pm

If the seat on our recently acquired 720 was several inches higher my opinion is dismounting would be easier and operator's vision may be improved. Nothing in that area appears to have been modified (lowered). At first glance such change appears to be readily doable; sorta like 'too good to be true'.

Would appreciate suggestions, and especially anyone's knowledge of experience on this subject. Herb(GA)

Replies:

Posted By: Steve in NJ
Date Posted: 04 Oct 2015 at 7:43pm

Herb,
The only thing I could think of to raise the seat is put a spacer bar (like a piece of square tubing) under the seat front and rear where it bolts to the transmission. I just installed my new seat on my 620, and there's only 4 bolts that hold it to the tranny. The bolt holes in the seat frame are slotted a little bit to. HTH
Steve@B&B

-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife