Construction and other equipment

Print Page | Close Window

hyd leak

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=112283
Printed Date: 05 Sep 2025 at 9:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: hyd leak

Posted By: SHAMELESS
Subject: hyd leak
Date Posted: 21 Sep 2015 at 8:44pm

anyone know the easiest way to take a hyd cyl out of the inside arm of an extend-a-hoe? have a leak in there somewhere, dunno if it's a line or a seal...buts it's really pumping oil out! I put a pin in it to hold it up inside, but it's still pumping oil out...must be a line!

Replies:

Posted By: Coke-in-MN
Date Posted: 21 Sep 2015 at 11:35pm

if its leaking and you have the valve also in neutral should not leak unless valve body is leaking also .

there is a pin on cylinder rod that goes into inside slide - remove that and other pin at end of cylinder and it should come out of arm .

Hoses should be visible on top of cylinder -

-------------
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.

Posted By: SHAMELESS
Date Posted: 22 Sep 2015 at 10:56am

thanks Coke