Farm Equipment - c transmission problem

Print Page | Close Window

c transmission problem

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=105965
Printed Date: 23 Aug 2025 at 5:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: c transmission problem

Posted By: Richmar
Subject: c transmission problem
Date Posted: 10 May 2015 at 5:44pm

My 48 C will not stay in third gear unless you hold it in place. Any help would be appreciated. Do you think the problem is in the shift cover or in the transmission ?

Thanks:

Richmar

Replies:

Posted By: CTuckerNWIL
Date Posted: 10 May 2015 at 6:49pm

Shifter could be wore or slightly bent. You can take the rubber boot off and remove the snap ring(the tricky part ) and remove the retainer thingy and pull the shifter out. It should be obvious upon inspection if the ball on the end is noticeably wore or if the shifter isn't straight.
The problem might more likely be in the forks on the side cover. You have to drain the tranny to pull the cover and inspect . You can also inspect the gears with that cover off.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF