Big Ten Paint Codes?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=105418
Printed Date: 25 Jun 2024 at 1:35am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Big Ten Paint Codes?
Posted By: Justin(IN)
Subject: Big Ten Paint Codes?
Date Posted: 28 Apr 2015 at 9:14am
What are the paint codes for a Big Ten?
Thanks:
Justin
|
Replies:
Posted By: foneman50
Date Posted: 28 Apr 2015 at 9:33am
I have the same questions, and are the B-100 the same codes? thanks
|
Posted By: Rod in MN
Date Posted: 28 Apr 2015 at 3:06pm
HI: This is what the paint shop came up with using there paint gun to match the paint
Nason 676791 IE
car: Chrysler
Code:SY4 Year 1979
Color: Brt Yellow
General Motors 649574 IE
Beige Cream
Code: 8440
Color: Beige
I used this and it came up as the same as Allis code number
Good Luck
Rod in MN
|
Posted By: foneman50
Date Posted: 28 Apr 2015 at 6:04pm
thanks Ron in MN
Clarence Michigan
|
Posted By: ctbowles58
Date Posted: 28 Apr 2015 at 8:14pm
I think there were 2 or 3 different yellows used during the time frame of the yellow L&G tractors.
-------------
190XT 2WD45 WF D15 D14 CA BIG10 302 & 303 bailers 77G rake 80R mower 6 plows and alot more
|
Posted By: talntedmrgreen
Date Posted: 28 Apr 2015 at 9:17pm
He is right...there were a few different yellows, so model as well as year can be important if a guy is looking to match oem.
It has been a few years now, but when I restored my Big Ten, Industrial Touchups aerosols. I am glad I did as Ibstill have a couple cans for identical match touchups and adding accessories.
I sent them an unfade/unblemished steering gear and they matched it toLoraine Yellow, AC code 921281. Next time I would rather dind this in a gallon or quart, and then just buy a spray can or two to save. I can say their spray cans are amazing for wide, even spray. Their nozzles may do better than my gravity feed gun, but I would love to add hardener in a mix.
http://www.industrialtouchup.com/allis-chalmers.aspx
-------------
Patterson B1*B1/B1Forklift*B10*BigTen/B1Loader*B110*B208*B206*616*Homelite T16H/T8/T7/RM7E*Landlord/Loader/Trencher*Broadmoor717*Serf525*2110*7790*Legacy XL*Twin 20*Squire9*Squire6*JCPenny 494
|
Posted By: foneman50
Date Posted: 28 Apr 2015 at 9:26pm
thanks, are they still avaible, and where can I get them
Clarence (Michigan)
|
|