Homemade carb soak

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Does anyone experimented with any type of home made carb soak? I recently went to an auction and bought several boxes of old carbs, probably at least 30 of them in fact. My plan was to work on them in my free time this winter and then sell them next year. I've generally started each carb with a soak in one of those commercially available gallon of carb cleaner, then disassemble, then clean in an ultrasonic and blast cabinet where necessary, but with this many carbs to do I was hoping to find a cheaper alternative to the $40 gallons, for at least the initial clean up. 

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
powertech84 Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 17 Oct 2009 Location: Wisconsin Points: 467	Post Options Post Reply Quote powertech84 Report Post Thanks(0) Quote Reply Topic: Homemade carb soak Posted: 23 Sep 2024 at 12:59pm
	Does anyone experimented with any type of home made carb soak? I recently went to an auction and bought several boxes of old carbs, probably at least 30 of them in fact. My plan was to work on them in my free time this winter and then sell them next year. I've generally started each carb with a soak in one of those commercially available gallon of carb cleaner, then disassemble, then clean in an ultrasonic and blast cabinet where necessary, but with this many carbs to do I was hoping to find a cheaper alternative to the $40 gallons, for at least the initial clean up.

Sponsored Links

DaveKamp Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Apr 2010 Location: LeClaire, Ia Points: 5754	Post Options Post Reply Quote DaveKamp Report Post Thanks(0) Quote Reply Posted: 23 Sep 2024 at 1:14pm
	The carb soak stuff you find in one-gallon cans is a cocktail of some rather nasty components... hence the price, and effectiveness. Most if it makes excellent work of cast iron carb parts, and has no problem clearing shellac from brass, stainless, etc., but it can be pretty harsh on Zamak. Most antique tractor carbs (Marvel-Schebler, Zenith, etc) will be iron bodies with brass orfices. Newer stuff will be Zamak, or some flavor of aluminish die-casting stock. I've been doing most of my carbs with the dip-can, followed by ultrasonic and bead-blaster. I usually blast the exterior of mine BEFORE disassembly, THEN rinse it in degreaser, so the the exterior crud doesn't take away all the effectiveness of my dip-can. It DOES mean that my blast cabinet gets cruddy, but it's gotta go Somewhere, right? One trick I DO use... is distilled water and plastic baggies. I'll fill the ultrasonic tank about 3/4 the way with distilled water, then put my carb parts in a plastic baggie, then pour some vinegar into the bag, zip it shut, and lower it into the ultrasonic. That keeps the US tank clean, but the heat and ultrasonic energy passes through to the parts... with the heat, and the vinegar's acetic acid, parts clean up pretty well.
	Ten Amendments, Ten Commandments, and one Golden Rule solve most every problem. Citrus hand-cleaner with Pumice does the rest.

steve(ill) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 11 Sep 2009 Location: illinois Points: 81240	Post Options Post Reply Quote steve(ill) Report Post Thanks(0) Quote Reply Posted: 23 Sep 2024 at 1:19pm
	try boiling one in a pan of water with dish soap....as the first step.
	Like them all, but love the "B"s.

jvin248 Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 17 Jan 2022 Location: Detroit Points: 319	Post Options Post Reply Quote jvin248 Report Post Thanks(0) Quote Reply Posted: 23 Sep 2024 at 8:33pm
	. I'm a recent convert to Ultrasonic cleaner (HF small one). Almost taking carbs off running tractors just to clean em up inside. Dawn dishsoap is about the best initial cleaner you can use. Simple Green or Purple Cleaner or Orange cleaner added to the dawn does quite a lot in the UC. .

WF owner Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 12 May 2013 Location: Bombay NY Points: 4665	Post Options Post Reply Quote WF owner Report Post Thanks(0) Quote Reply Posted: 24 Sep 2024 at 6:39am
	I had been soaking carburetors in the one-gallon solution. It worked okay, but not great. I had a carb off a B that I soaked several times, with no luck. Quite a while back, Dick L suggested boiling the carburetor. I tried it and it cleaned up whatever orifice that was giving me problems. I still boil them and have pretty good luck. I've heard a lot about the ultrasonic cleaners. Could someone explain how they work?

nanuk Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Joined: 22 Aug 2013 Location: Saskatchewan Points: 257	Post Options Post Reply Quote nanuk Report Post Thanks(0) Quote Reply Posted: 24 Sep 2024 at 4:27pm
	My understanding of US cleaners.... they create a sonic wave at 34,000-45,000 hz those waves create a "bubble" that is actually a vacuum, and as it collapses, it creates a mini shock wave, literally knocking off anything that can be knocked off it is so powerful, that it'll eat holes in aluminum foil. I have heard of it pitting soft alloys of aluminum as well, but have never seen it Home made US cleaner, take a plastic tub, a piece of 1/2" plywood, and a square faced, 1/4 sheet, random orbital sander, a tube of silicone sealer and 4 SS bolts/nuts/washers that fit the holes in the sander's face plate remove the rubber face on the sander drill 4 holes through the plywood/tub the same as the holes in the sander's face plate. cover one side of the plywood and matching tub area with silicone. also smear the bolts/holes. mount the plywood on the inside, sander on the outside, sandwiching the tub material between, and bolt them up tight. now, when you fill with water over the plywood, the sander's vibrations are transferred into the water and will knock loose a LOT of crud from stuff in the water. works great on stuff that's covered in old grease/dirt etc might work on carbs if using a detergent/solvent.
	AC7060Pd 1975

Dirt Farmer Members Profile Send Private Message Find Members Posts Add to Buddy List Silver Level Access Joined: 15 Sep 2020 Location: Illinois Points: 354	Post Options Post Reply Quote Dirt Farmer Report Post Thanks(0) Quote Reply Posted: 24 Sep 2024 at 7:56pm
	WF owner you mentioned Dick L, was he also the guy with mules and he would post pictures of his mules on here, haven't seen him on here in a while and had no luck looking up his history. Anybody got any info, hate to see someone fall through the cracks.