| Author |
 Topic Search  Topic Options
|
Gargoyle 
Silver Level
Joined: 29 Aug 2013
Location: Missouri
Points: 186
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: HD11E turning with clutch only
Posted: 09 May 2014 at 6:40pm |
|
As I'm fairly new to the dozer game, ok really new to the dozer game, how much turn should I expect from just the clutch? I don't really get much when driving on level ground with no load. I get more turn when going uphill or under load. Is that normal?
|
 |
|
Sponsored Links
|
|
|
CAL(KS)
Orange Level
Joined: 18 Sep 2009
Location: Chapman, KS
Points: 3800
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 May 2014 at 8:48pm |
|
sounds normal to me. if you need to turn when not under load or turn sharp, use clutch and brake
Edited by CAL(KS) - 09 May 2014 at 8:49pm
|
|
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
|
DMiller
Orange Level Access
Joined: 14 Sep 2009
Location: Hermann, Mo
Points: 33549
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 May 2014 at 3:58pm |
|
My 7G responds that way, only issue I have is not much forgiveness when using brake to turn, is either on it or off with the power brake hydraulic application. Gotta be careful for tighter quarters and turns.
|
|
Gargoyle
Silver Level
Joined: 29 Aug 2013
Location: Missouri
Points: 186
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 May 2014 at 4:02pm |
|
Thanks for the input.. I had no experience to go on to judge how well this is working..
|
|
DMiller
Orange Level Access
Joined: 14 Sep 2009
Location: Hermann, Mo
Points: 33549
|
Post Options
Thanks(0)
Quote Reply
Posted: 12 May 2014 at 4:30pm |
|
I haven't gotten game on enough to adjust the brakes application pressure since I replaced my steering hydraulics pump, I suspect someone was trying to make up for a worn unit and tightened down pretty harsh, after the trans work is done will look to that.
|
|
Gargoyle
Silver Level
Joined: 29 Aug 2013
Location: Missouri
Points: 186
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 May 2014 at 5:37pm |
|
The previous owner of my machine had the right steering linkage tightened down so the clutch was always engage. They appear to be trying to correct a problem that the clutch was oil soaked due to a leak on the seal for the bevel gear.
I remedied all of that an put on new brake linings.. Steers nice and smooth on the right side. Left side brake linings are still to come.
|
|
