200 PD and pto issues?

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Just kind of looking for another tractor as our 7010 is down for the count. I see an ad for what looks like a pretty straight 200. The catch is the following from the ad. 

"Could use high low clutch adjustment and pto valve replaced. Pto works but seems to loose pressure after extended use."

I've tried reading through some other threads here, but seem to be getting more confused the longer I read. By the statement of "pto valve" I'm assuming this one has the hydraulic pto clutch. Something else I've read seems to indicate that the pto clutch and the PD run from the same hydraulic supply. So, is this a possible case of there being some larger hydraulic issue at hand? Other thoughts? 

Edited by Spelt Farmer - 5 hours 59 minutes ago at 9:27am

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Spelt Farmer Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 10 Jun 2013 Location: Ohio Points: 90	Post Options Post Reply Quote Spelt Farmer Report Post Thanks(0) Quote Reply Topic: 200 PD and pto issues? Posted: 5 hours 60 minutes ago at 9:26am
	Just kind of looking for another tractor as our 7010 is down for the count. I see an ad for what looks like a pretty straight 200. The catch is the following from the ad. *"Could use high low clutch adjustment and pto valve replaced. Pto works but seems to loose pressure after extended use."* I've tried reading through some other threads here, but seem to be getting more confused the longer I read. By the statement of "pto valve" I'm assuming this one has the hydraulic pto clutch. Something else I've read seems to indicate that the pto clutch and the PD run from the same hydraulic supply. So, is this a possible case of there being some larger hydraulic issue at hand? Other thoughts? Edited by Spelt Farmer - 5 hours 59 minutes ago at 9:27am

Sponsored Links