This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
83 allis chalmers 715c cylinder help |
Post Reply |
Author | |
ac89
Silver Level Joined: 18 Mar 2015 Location: maine Points: 325 |
Post Options
Thanks(0)
Posted: 25 May 2020 at 6:55am |
I need a dipper cylinder for the boom it blew the cap off. Any help would be greatly appreciated. I don't know of any bone yards that would have it. I tried general gear but their machine is a 715b nothing is the same.
|
|
Sponsored Links | |
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41160 |
Post Options
Thanks(0)
|
Are you sure - I have a AC 615 cylinder now on my 715B .
You should be able to repair the cylinder by having a new end cap made or try MINNPAR to see if they have the part . The other option would be to make a retainer to clamp or weld to cylinder body then using a plate and bolts to anchor end cap to retainer . On one cylinder i had where threads were damaged I cut the cylinder off about 1/4" which allowed the end cap to grab good threads by moving further up threaded area . |
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
DougG
Orange Level Joined: 20 Sep 2009 Location: Mo Points: 7936 |
Post Options
Thanks(0)
|
Sounds like a stupid kid post
|
|
DMiller
Orange Level Access Joined: 14 Sep 2009 Location: Hermann, Mo Points: 29235 |
Post Options
Thanks(0)
|
Any hydraulic shop worth their salt can reman the tube with a new head end.
|
|
ac89
Silver Level Joined: 18 Mar 2015 Location: maine Points: 325 |
Post Options
Thanks(0)
|
I found a place online that I can get a new end cap so I think I am going to have a machine shop make a new barrel. I want to do it right and not have to do it twice. I only asked on here to see if anyone had a cylinder or knew of a place that may have 1. I'm not a dumb kid I don't really appreciate the insult. I actually just got done rebuilding 4 cylinders by myself. I have 10 allis chalmers tractor's I'm not new to working on equipment.
|
|
Coke-in-MN
Orange Level Access Joined: 12 Sep 2009 Location: Afton MN Points: 41160 |
Post Options
Thanks(0)
|
Why replace the barrel ? It seems the threads in the cast end cap are the ones that get worn - After I repaired that cylinder and it has only ran for 20 years now .
But I had this thing of how much do I spend to how can I repair it myself - finances said fix it myself . |
|
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful." |
|
ac89
Silver Level Joined: 18 Mar 2015 Location: maine Points: 325 |
Post Options
Thanks(0)
|
I was hoping it was just the cap but the threads on the barrel are stripped beyond use actually both the cap and the barrel are stripped.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |