Broke my 1963 B10 Bevel Gear Box

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Well, I was blowing snow during that last big snow storm and I blew up the bevel gear box on my 1963 Allis Chalmers B10. I didn't destroy the case, the ball bearing race disintegrated, the balls were still in there, but only half a race, and the needle bearing and seal were gone, several teeth broke off of both bevel gears. 
I believe the keyway in the yoke is toast too, because it just fell off and the key was more of a triangle than a square. 
So I am looking for an entire bevel gear box part number 154062 with shafts, bearings, bevel gears, keys and seals OR just the bevel gears, ball bearing, driving shaft needle bearing and seal and a yoke. 
I also bent the PTO pulley trying to get it off with a puller. 
Apparently I need a different tool. 
Here are some sad pix:

Notice how the race split in half and then broke into 3 pieces.
Chewed up the bevel gear teeth bad.
 The balls are still there but the race is broken.
This is the box I need 154062...... OR.... just the parts below.
Can anyone help me out?

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
ezeerider Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 15 Feb 2016 Location: Mt Airy , Md. Points: 14	Post Options Post Reply Quote ezeerider Report Post Thanks(0) Quote Reply Topic: Broke my 1963 B10 Bevel Gear Box Posted: 15 Feb 2016 at 7:16pm
	Well, I was blowing snow during that last big snow storm and I blew up the bevel gear box on my 1963 Allis Chalmers B10. I didn't destroy the case, the ball bearing race disintegrated, the balls were still in there, but only half a race, and the needle bearing and seal were gone, several teeth broke off of both bevel gears. I believe the keyway in the yoke is toast too, because it just fell off and the key was more of a triangle than a square. So I am looking for an entire bevel gear box part number 154062 with shafts, bearings, bevel gears, keys and seals OR just the bevel gears, ball bearing, driving shaft needle bearing and seal and a yoke. I also bent the PTO pulley trying to get it off with a puller. Apparently I need a different tool. Here are some sad pix: Notice how the race split in half and then broke into 3 pieces. Chewed up the bevel gear teeth bad. The balls are still there but the race is broken. This is the box I need 154062...... OR.... just the parts below. Can anyone help me out?

Sponsored Links

AaronSEIA Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 11 Sep 2009 Location: Mt Pleasant, IA Points: 2551	Post Options Post Reply Quote AaronSEIA Report Post Thanks(0) Quote Reply Posted: 16 Feb 2016 at 5:58am
	The gears can be found on eBay. I think there is a set of two up there now. The bearings should be easy to find. Just go to a good parts store with the Simplicity numbers and they should be able to cross them. AaronSEIA

ezeerider Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 15 Feb 2016 Location: Mt Airy , Md. Points: 14	Post Options Post Reply Quote ezeerider Report Post Thanks(0) Quote Reply Posted: 19 Feb 2016 at 9:58am
	Thanks... just bought the bevel gears.