| Author |
 Topic Search  Topic Options
|
wrightbro1296 
Bronze Level
Joined: 20 Nov 2016
Location: orange,CT
Points: 2
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: wc puller
Posted: 23 Jan 2017 at 4:38pm |
|
hey everybody I've got a wc puller that i pull stone boat with. i weigh 2950 with me on it and have cast centers. i had the wild idea of seeing if i can make it in the local 2500 pound class. just curious if anybody has done it or tips such as (use a ca front end) or something like that. its got .125 flat tops win 45 crank. big carb and lots of fuel. i think i can dominate the 2500 pound class if i can get that light. any input is helpful. thanks
|
 |
|
Sponsored Links
|
|
|
dawntreader74
Orange Level
Joined: 28 Oct 2013
Location: Manteno
Points: 1770
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Jan 2017 at 6:39pm |
|
change to press steel 24' back wheels' would be a lot lighter.
|
|
Robacpuller
Silver Level
Joined: 07 Apr 2016
Location: Wisconsin
Points: 248
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Jan 2017 at 8:11pm |
|
Take off whatever don't go up and down or turn. Lol
|
|
Ken(MI)
Orange Level
Joined: 14 Sep 2009
Location: Lansing, MI
Points: 618
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jan 2017 at 12:14pm |
|
Not cheap, but it can be done, RC rear end, or the guts in a light WC rear end (39 or early 40) tin wheels or lightened cast centers, aluminum frame rails and a few other parts will easily get you in there. You will also need to pay attention to tire weight, they vary a lot.
|
|
PaulB
Orange Level
Joined: 12 Sep 2009
Location: Rocky Ridge Md
Points: 4753
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jan 2017 at 3:27pm |
|
Years ago someone did that here locally. They use a set of 28" spokes with tubeless tires and made aluminum frame rails along with only a very small car radiator. It still needed a driver of less that 100 pounds and would overheat if it ran more than the length of the track. If you're running a 2500 pound class with no extra allowed weight a CA is very tough to beat
for any kind of pulling.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY
|
|
WF owner
Orange Level
Joined: 12 May 2013
Location: Bombay NY
Points: 4669
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Jan 2017 at 3:36pm |
|
Sometimes, stripping them down doesn't work as good as you think. When you're right at the edge on weight, it's hard to balance a tractor.
I agree with PaulB. If you want to pull 2500, a CA is your best bet.
|
|
Kip-Utah
Orange Level
Joined: 14 Sep 2009
Location: Southern Utah
Points: 872
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Jan 2017 at 1:24pm |
I have pulled a styled WC with pressed steel 24" wheels at 3000 lbs. Transfer sled not dead weight, but this tractor was poorly balanced. It was way better at 3500. Kip
|
|
HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!!
|
|
