Allis 7000 Hydraulic Issue

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I changed the hydraulic fluid in my allis 7000. Because there was water in the system, I blew out the lines (If I wasn't supposed to do this let me know) including the cooler, but not the pump.

New filter
New fluid

Now when I try to steer, the wheel goes immediately to the left/right (depending on what direction I try to steer) and the steering just pounds away trying to go in that direction. The only way to stop it is to shut off the tractor and restart it.

I've bled all the lines. Before this I could move the front wheels by the steering wheel without the tractor on. Now they don't move no matter what I do.

The hydraulics worked perfectly before the change.

Any ideas?

Edited by NNYFarmer - 23 Oct 2024 at 12:48pm

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
NNYFarmer Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 30 Mar 2013 Location: Watertown Points: 6	Post Options Post Reply Quote NNYFarmer Report Post Thanks(0) Quote Reply Topic: Allis 7000 Hydraulic Issue Posted: 23 Oct 2024 at 12:47pm
	I changed the hydraulic fluid in my allis 7000. Because there was water in the system, I blew out the lines (If I wasn't supposed to do this let me know) including the cooler, but not the pump. New filter New fluid Now when I try to steer, the wheel goes immediately to the left/right (depending on what direction I try to steer) and the steering just pounds away trying to go in that direction. The only way to stop it is to shut off the tractor and restart it. I've bled all the lines. Before this I could move the front wheels by the steering wheel without the tractor on. Now they don't move no matter what I do. The hydraulics worked perfectly before the change. Any ideas? Edited by NNYFarmer - 23 Oct 2024 at 12:48pm

Sponsored Links

DrAllis Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Points: 20534	Post Options Post Reply Quote DrAllis Report Post Thanks(0) Quote Reply Posted: 23 Oct 2024 at 1:51pm
	Crossed up lines somewhere.

NNYFarmer Members Profile Send Private Message Find Members Posts Add to Buddy List Bronze Level Joined: 30 Mar 2013 Location: Watertown Points: 6	Post Options Post Reply Quote NNYFarmer Report Post Thanks(0) Quote Reply Posted: 23 Oct 2024 at 2:49pm
	No. The lines haven't been changed at all. I'm the only one using the tractor so no one else could have done it

DrAllis Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Points: 20534	Post Options Post Reply Quote DrAllis Report Post Thanks(0) Quote Reply Posted: 23 Oct 2024 at 2:57pm
	OK. Well, you said you blew out the lines. I would have assumed that meant you had to disconnect them somewhere. So, if the lines are routed correctly, the problem must be in the steering orbitrol itself. Why ??? I have no idea. If it was steering properly before, I cannot imagine why there would be a problem now. Hydraulic filter installed backwards ?????? Edited by DrAllis - 23 Oct 2024 at 2:58pm