This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Distributor or magneto for the most power |
Post Reply |
Author | |
WF owner
Orange Level Joined: 12 May 2013 Location: Bombay NY Points: 4666 |
Post Options
Thanks(0)
Posted: 28 Aug 2016 at 8:53am |
A friend and I are arguing about which source of ignition will provide the most power for a pulling engine. I am not going to tell you which side I'm on to get unbiased answers.
One says that a magneto will make more power since it has a stronger spark. One says a distributor will make more power, since it has an advance mechanism. We are assuming that everything is in good shape in either setup. What do you guys say? |
|
Sponsored Links | |
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20528 |
Post Options
Thanks(0)
|
By design, the distributors timing advance mechanism provides better performance at part-throttle, full throttle and anything in-between. The closer to stock the engine is, probably the less important this advance mechanism feature is. Many times I'm under a speed limit and only run the engine at 1200 RPM and keep increasing the RPM the farther down the track I go. Other times I may be at full throttle all the way, but end up lugging the engine down to near stall before spinning out. So, what I'm saying is....no mag for me.
|
|
DiyDave
Orange Level Access Joined: 11 Sep 2009 Location: Gambrills, MD Points: 51711 |
Post Options
Thanks(0)
|
Pertronix unit, in a distributor, wired correctly...
|
|
PaulB
Orange Level Joined: 12 Sep 2009 Location: Rocky Ridge Md Points: 4747 |
Post Options
Thanks(0)
|
I agree with Dr Allis and Dave. Although I will add the get the best performance with a distributer
a proper working charging system is a must. Without correct voltage a distributer will have the proper output. This is where a magneto would be the choice, where a tractor had the charging system stripped off for weight. With that being said I remember seeing a few old timers years ago at some pulls (back wen tractors from the 30s were considered farming tractors not antiques) that knew how to play with the mag advance lever to get their tractors to lug down to next to stalling and keep on pulling, whereas others would fall flat as soon as the RPM would drop to about half speed.
|
|
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |